Aluminum plate production process

[China Aluminum Network] Aluminum is our company's main operating commodity, the quality of goods and quality of service, by the vast new and old customers alike. Here we share the aluminum production process and precautions.

Aluminum production process through these processes: dosing - cutting - planing - cutting angle - bending - panel - reinforced - retest.

Ingredients: According to the order received by the factory, the data model, specifications, color choice, and then shipped to the cut before the boot to be cut.

Cut: When cutting, first adjust the positioner to the required scale. After cutting a small point first, check whether the scale is consistent with the demand, and when it matches, cut it out. Otherwise, adjust it until it stops. When cutting, the direction should be accurate. From left to right, from top to bottom, ban on anti-cut; check at the end of the cut to see if it is in line with the specification, after the plate will be lightly put in the clean channel to prevent the plate decoration The surface is damaged.

Planing: Care must be taken when planning a plan to re-analyze, confirm, and shape it.

Cut angle: Punching on the angle machine, cut angle does not allow beyond the centerline of the router.

Bend: Be careful not to repeat the bending, bending more twice to prevent fatigue damage.

Group board, reinforcement: First, prepare the information and things of the board, it should be noted that the board process can not damage the board finish.

Re-inspection: Conduct re-inspection on the finished aluminum sheet to see if it meets the manufacturing specifications and prevent the manufacturer from having a bad effect when leaving the factory.

The above is the aluminum production process and precautions, and we look forward to assisting you. If there is a need for customers to wait for your inquiries, we will sincerely serve you!