For reverse software, the surface function is relatively weak compared to professional CAD software, and the processing ability for complex surfaces is limited. At the same time, the method of using the scanning point cloud reverse generation for geometric features such as the corner transition, plane, boss and transition surface in the model not only has a large workload, but also has low production efficiency, and more importantly, it is difficult to ensure correct shape characteristics. It often causes serious distortion. Therefore, using professional CAD software to build these geometric features is more accurate to define the features of the part. Therefore, the measuring machine can be fully utilized to measure the physical model, and the surface data of the standard geometric features on the physical model can be directly obtained, such as a standard shape such as a plane, a cube, a cylinder, a cone, a sphere or a ring, and the other free-form portions are three-dimensional. The scanning method acquires point cloud data. This can effectively save scanning time, and more importantly ensure the accuracy of data and improve production efficiency. However, most of the reverse software is not well integrated with professional CAD software, and data files cannot be converted to each other without loss of feature information. The biggest advantage of CopyCAD is that it can be used in conjunction with DELCAM's forward design software PowerSHARE to model the shape of the forward structure and the surface of the reverse fit, and convert them to each other as needed. Part of the surface can be stitched and smoothed in CopyCAD, but for more complex work, it can be converted to the more powerful PowerSHARE surface for editing, smoothing, rounding, etc., and can also be forwarded in PowerShape. Establish local feature surfaces or establish surface content not included in point cloud data; after completion, you can transfer back to CopyCAD to continue the reverse of the triangle model. The conversion process is seamlessly connected through a button to ensure the integrity of the feature information and no feature loss. This is something that other reverse software can't do. At the same time, the construction curve generated in CopyCAD can also be directly exported to PowerShape for forward modeling and can be returned to CopyCAD to continue the reverse work. The triangular model generated by CopyCAD can also be used for mold design directly in PowerSHARE. As can be seen from the above, DELCAM's CopyCAD software has a powerful reverse modeling function. Combining it with NC processing technology and rapid prototyping technology will definitely shorten the product development and development cycle and improve the success rate of product innovation. , quality and shortened development cycle. It has created an opportunity for new products to enter the market, bringing huge economic benefits to enterprises. Previous page Hang net,Hang net price,Hang net product Jiangsu Zhongyi Work Rigging Co., Ltd. , https://www.zy-rigging.com
