Almost every renovated home will have some regrets, or the design is not well thought out, or the decoration will be left behind because of negligence, especially in the bathroom, this function is supreme, the water and electricity are all in the room, at home It is difficult to construct, decoration design, sanitary ware selection, construction quality, which one can not be vague. Whether it is a decoration company or a consumer, as long as you pay attention to it, you will have shortcomings. The reasons are mainly the following three aspects: I did not consider the installation before the purchase. After the purchase, I found that it was neither beautiful nor convenient to use. In recent years, consumers have become more and more willing to spend money on bathroom decoration. In addition to construction, the follow-up investment is also very large. Generally speaking, the cost of purchasing only sanitary ware is about 1/8 of the total decoration. Because of the variety of sanitary products, consumers often pick up their eyes when they buy them. After buying them home, they find that they are not in harmony with their own bathroom. For example, in the market, I chose a very beautiful wash basin, but when I got home, I found that my head was bigger and occupied some space of the toilet, so that the tissue box and the trash can could not be "everyone". The result is that each time "It is not very convenient." Reminder: Consumers should consider what kind of products to purchase at the design stage. During construction, they can reserve space according to the specific installation requirements and technical parameters of the purchased products, rebuild pipelines, create installation conditions, and ensure the decoration process. Can be successfully completed, bathroom products can be installed and used normally. In addition, the installation of sanitary ware requires very accurate measurement data, which is a difference of 1 cm may require a second rework, so be sure to ask the professional to measure the size, sloppy. Before the start of construction, it is not well considered, and the construction is modified. The water circuit transformation has no drawings to follow, leaving hidden dangers for subsequent construction. Under normal circumstances, the decoration company will draw the decoration design drawings for the owners, including the overall renderings, detailed construction drawings and water circuit reconstruction drawings. However, due to the incomplete communication between some owners and the designers in advance, due to the inconsistency of the construction, the original design is constantly revised, so that when the construction is modified, the concealed works such as water circuit reconstruction are completed, but no map is found. Follow, leaving hidden dangers for subsequent construction. Reminder: When there is a water circuit in the bathroom, the consumer needs to ask the designer for a circuit transformation map in advance. If there is any change in the construction process, the consumer must communicate with the designer and draw a transformation map. Start construction, it is best not to modify it while construction, so as not to injure the wire during the construction of the wall in the future. The design is not flexible, and a slight error in the construction will cause a series of rework. This situation is more common in the bathroom. If the socket on the wall is fixed, the height of the ceiling is found to be in conflict with it, but the tile has been attached and it is difficult to change. Another example is that after the wash basin is installed in place, it is found that the pipeline cannot pass normally, and it has to be turned out of the bathroom cabinet by a few more turns. Reminder: Consumers must consider the existing design and future construction is flexible and flexible before purchasing sanitary products. If the faucet needs to pre-embed the appropriate water supply pipeline, the bathroom cabinet requires sufficient installation space, the toilet seat needs to consider the wall distance, the shower room needs to consider the load-bearing wall, the floor drain position should be appropriate, etc. These conditions must be considered before the home installation construction. Good, otherwise the bathroom products can not be installed and used.
Wine rack,stainless steel wine rack,Iron wine rack, wine holder,wine bottle rack
wire holder is made of high quality 304 stainless steel, It is easier to clean without rust, safe, healthy and durable, Prevent rust or chemicals from contaminating food and damaging health. Suitable for putting wire bottle.
China leading manufacturers and suppliers of Wine Holder,Wine Bottle Holder, and we are specialize in Wine Rack,Hanging Wine Rack, etc.
wine bottle rack,metal wine rack,wine display rack,Wine rack holder,honeycomb wine rack Shenzhen Lanejoy Technology Co.,LTD , https://www.bbq-grillgrate.com