China-Neoprene-EPDM-Foam-Racing-Seat-for-Race-Tail

NEOPRENE EPDM FOAM RACING SEAT FOR RACE TAIL

1)EPDM feature: Light, comfortable, good elasticity, water-proof, shock resistance and skid prevention. Could also offer antistatic insole sheet and EVA high foam adhesive.
2) supply different densities, hardness(the degree from 20 to 50), the different grade meet clients demands.
3) thickness: Customers requires are available
4)colour: Any general colours are available(black, white, gray more cheaper)
5)form/shape: Big sheet, blocks, roll, embossed/textured/designed, or even more smaller like A4 paper size.
EPDM (Ethylene Propylene Diene Monomer) closed cell sponge rubber material exhibits very good aging properties, compressibility, and shows an excellent resistance to ozone and oxidation, which explains its use in a variety of industrial and commercial applications.
We produce gaskets, seals, and other custom die-cut parts in EPDM elastomers for
Customers that span across industry groups and international locations.

Mylon- At a glance

Currently, we supply the manufacturers of Carpet, double-sided adhesive tape, shoes, arts and crafts, stationery, message boards, foam toys, sporting goods and others Water resistance: Airtight bubble pore structure, non-absorbent, moisture-proof and waterproof properties is good. Corrosion resistance, oil resistance, water, acid and alkali corrosion, such chemicals antibacterial, non-toxic, tasteless, no pollution. Processing: No joint, and easy to hot-press, clipping, gelatinize, joint etc. Fixed: Recovery and earthquake resistance of high tension, strong toughness, good shockproof/cushioning properties. Heat insulation, heat preservation, protection and outstanding performance, low resistance and cold exposure. Sound insulation, sound insulation effect, airtight bubble

Example Gasket Application

Properties

Weatherproofing
Closed cell EPDM is used for many outdoor industrial gasketing applications for weatherproofing due to its resistance to aging, UV, ozone, and oxidation.
HVAC
This rubber sponge material proves beneficial in many HVAC systems and other flexible sealing applications, as it is resistant to compression set and atmospheric degradation. Automotive
EPDM is the material of choice for automotive taillight gaskets because of its excellent resistance to ozone and its unique sealing characteristics.
Electrical Enclosures
EPDM's excellent resistance to ozone, UV and oxidation and its closed cell structure allows this material to be used as gasketing for many outdoor electrical enclosures.
EPDM Rubber Sponge

SPECIFICATION DATA
  Specification Typical Value
Compression at 25% deflection (kPa): 35-65 49
Compression deflection at 50% (kPa): 80-160 112
Density (kg/m³): 120+/-20 134
Compression set (50% 22H 20°C): 25% Max. 14.1%
Water Absorption, max. change in weight (%): 10 0.6
Heat ageing, change in compression deflection, 22hrs at 100°C: +/-30% PASS
Flammability: FMVSS-302 PASS
Elongation at break (%): N/A 180
Tensile strength (kN/m²): N/A >500
Temperature range (low-high): N/A -40 to +70°C
High intermittent: N/A +100°C
Resistance to Air and UV: EXCELLENT  
Resistance to Oil: POOR  
Resistance to Acids: GOOD  
Environmental Protection: CFC AND HFC FREE CAN BE RECYCLED  


























  C losed cell rubber foam  is a high quality flexible insulation product designed for insulating in the field ot heating,ventilating,air-conditioning and refrigerating on the basis of the elastomeric foam with closed-cell structure. Kingwell provides efficient method of preventing undersirable heat gain or loss in chilled water systeml,cold and hot water plumbing,refrigerated pipes,air-conditioning ductwork and equipment.
 
Characteristics:
1. CFC/HCFC free.
2. Low Heating Conductivity.
3. Low Water Absorption Rate.
4. Good Fireproof and Soundproof Performance.
5. Good Aging Resistance Performance.
6. Easy Installation.
 
PRODUCT DATA  
Property Unit Value Test Method
Temperature range °F (°C)  -297~220 (-183~105) -
Density range lbs./ft³(kg/m³) 3.0~6.0 (48~96) ASTM D1622 or D1667
Thermal conductivity 75°F mean T (24°C) Btu@in./h@ft²@°F (W/mK) 0.27 (0.039) ASTM C177 or C518
90°F mean T (32°C) Btu@in./h@ft²@°F (W/mK) 0.276 (0.040)
Water vapor permeability  perm-in (kg/m@s@pa) 0.08 (1.16×10-13) ASTM E96 Procedure A        DIN 52615
Flame spread and smoke developed index - 25/50 ASTM E84, CAN/ULC S 102
V0 UL94
Water absorption, by volume % 0.2 ASTM C209
Mold growth - meet requirement UL181
Bacterial resistance meet requirement ASTM G22
Fungi resistance meet requirement ASTM G21/C1338
Resistance to agent chemical - stable performance to agent chemical -
Ozone resistance - good ASTM D1149
Aging resistance - 150 hours, slight wrinkles, no cracks, holes or distortion -
Wall thickness (normal)     Sheet/Roll in (mm) 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2"      (3,  6, 9, 13, 16, 19, 25, 32 , 40, 50) -
Width, sheet/roll in (m) 40", 48" (1, 1.22) -
Length, sheet  ft (m) 36" (0.915) -
Length, roll ft (m) 98, 49, 33, 26, 23, 20, 13, 10, 10, 8       (30, 15, 10, 8, 7, 6, 4, 3, 3, 2.5) -
 
Packaging:
In plastic bag per roll, standard size as below(Thickness×Width×Length)
1/4 Inch ×1M ×30M 
3/8 Inch ×1M ×20M
1/2 Inch ×1M ×14M 
5/8 Inch ×1M ×12M 
3/4 Inch ×1M ×10M 
1    Inch ×1M ×8M 
1 1/4 Inch ×1M ×6M 
1 5/8 Inch ×1M ×4M 
1 7/8 Inch×1M ×3M
The width of 1M to 1.4M is available to provide

Kitchen Faucet

DQOK is a professional manufacturer and supplier of kitchen faucets. Our company mainly produces brass/304 Stainless Steel bathroom Kitchen Sink faucets with high cost performance and high quality. We also provide OEM products and services for you.


Kitchen Faucet,Kitchen Taps,Brass Kitchen Faucet,Stainless-Steel Sink Faucet

Heshan Dingquan Sanitary Ware Industry Co., Ltd , https://www.dqokfaucets.com

July 18, 2024