Combined superheated steam trap

The combined superheated steam trap has two isolated valve chambers, which are connected by two stainless steel tubes to the upper and lower valve chambers. It is a combination of a floating ball type and an inverted bucket type steam trap. The valve structure is advanced and reasonable, in overheating, high pressure, Under the condition of small load, it can discharge the condensed water formed when the superheated steam disappears in time, effectively prevent the superheated steam from leaking, and the work quality is high. The maximum allowable temperature is 600 °C, the valve body is all stainless steel, the valve seat is made of hard alloy steel, and the service life is long. It is a special steam trap for superheated steam. It has obtained two national patents and filled the domestic blank.

When the condensed water enters the lower valve chamber, the float of the sub-valve rises with the liquid level, and the float ball closes the inlet of the steam pipe. The condensed water rises to the main valve chamber through the water inlet pipe, and the inverted bucket falls by its own weight, driving the valve core to open the main valve and discharging the condensed water. When the condensate level of the secondary valve chamber drops, the float drops with the liquid level and the secondary valve opens. The steam enters the inverted bucket in the upper main valve chamber from the inlet pipe, and the inverted bucket generates upward buoyancy, and the inverted bucket drives the spool to close the main valve. When the condensate level of the secondary valve chamber rises again, the next cycle begins again, intermittently draining.

Concerned about surprises

Label: Combined superheated steam trap

Previous: After 80, select cabinets to prevent four "traps" Next: Spot welder specific workflow