Decoration chandelier note How to install the chandelier

Chandeliers are very commonly used in decorating and decorating our homes. What do you need to pay attention to when decorating a chandelier ? The use of many chandeliers is also convenient. There are many ways to install ceiling chandelier. There are many chandelier installation steps. The decoration and chandelier attention and installation matters.

Decoration chandelier note

In the case of ceiling fixtures complete without damage and deformation, we must also pay attention to the susceptibility of the chandelier to the wall fixtures, and to the weight of the chandelier. Chandeliers should be equipped with a hanging box. Each hanging box can only hold one set of chandelier. The surface of the pendant lamp must be well insulated and no joints are allowed. The conductor cross-section must not be less than 0.4 square millimetres. The wiring in the terminal box should take measures to prevent the lamp head from being forced to drop the lamp.

If incandescent lamps are selected for the decoration chandelier , they cannot be installed on flammable components. When the distance between the bulb and the insulating table is less than 5 mm, insulation measures shall be taken between the bulb and the insulating table. The power of the incandescent lamp must not exceed the high power allowed by the luminaire.

If it is a fluorescent lamp, the ballast should be installed on the phase line. In the lamp should be to prevent the lamp foot off the shell, and there should be a margin in the lamp box, giant frame of the lamp and the ceiling of the decorative line parallel, the lamp's The frame should be close to the ceiling. Screw thread phase should be connected to the contact terminal, the zero line should be connected to the threaded terminal, the lamp's insulation shell should be complete, no damage and leakage phenomenon. The hook of a fixed lantern should not be smaller than the hook of the lamp, and the diameter of the lamp should not be less than 6 mm.

How to install the pendant lamp

1. When installing a chandelier, it depends on whether the top surface of the concrete can be fastened with embedded parts, penetration bolts, and expansion bolts. When installing, according to the theme of the lamp and the weight to determine the expansion bolts used by the specifications, but the small should not be less than M6 (millimeters), multi-head pendant lamp should not be less than M8 (millimeters), the number of bolts at least two less. Light self-tapping expansion tube screws cannot be used. There are round, square or rectangular bases (chassis), base sizes vary. The base of the lamp can be fastened with expansion bolts, or it can be fastened with wood screws on the embedded bricks. If the lamp base diameter exceeds 100 mm, 2 screws must be used.

2. After fixing the platform, fix the wall light on the platform. The base station is usually made of wooden boards, the thickness of the board should be greater than 15 mm, and the surface should be painted with decorative paint. When the wall light is installed, it can be fixed by screwing in the mounting screw hole of the lamp position box, or it can be fixed on the wall surface by punching, pre-embedded wood bricks or using plastic expansion tube screws. Recessed lamps are suitable for ceilings. The basic form of the lamp is cylindrical, and the lamp mouth is a lead-plated, titanium-plated or nickel-plated metal wide-brimmed ring. After the lamp is installed, it closely adheres to the top surface and has a good decorative effect. Symmetrical sides of the lamp body have a snap spring as a device for fixing the lamp. The opening is in the direction of the lamp and the butterfly nut is used to adjust the spacing of the circlip.

The above is the attention of the decoration chandelier that Xiaobian brought to everyone, and how to install the chandelier. The installation of the chandelier is still relatively trivial, not only the assembly of the chandelier itself, but also the setting of many internal circuits. If you want to know more about other related information, please continue to pay attention to this site, more exciting so stay tuned!

Chandelier living room chandelier bedroom chandelier

Digital Truck Scale

SCS series digital modularization electronic Truck Scale consists of Digital Load Cell, Digital Weighing Indicator and modularization platform. Digital technology improves the quality of electronic truck scale and makes it have more convenient adjustment, safer operation, easier maintenance, quicker communication, higher intelligence and stronger anti-interfering performance.

Portable Truck Scales,Digital Truck Scales,Digital Load Cell Truck Scale,Truck Scale With Digital Indicator

SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com