Entrance decoration restaurant decoration interior decoration window paint switch faucet decoration partition Tuya Zigbee Smart LED Bulb,led smart light,led smart bulb,led Zigbee smart gu10,led Zigbee smart candle light Foshan Extrlux Co., Ltd. , https://www.extrlux.com
Note: The content on this page is by no means a child's play. Please be careful.
Construction safety issues are mainly classified into theft prevention, fire prevention, waterproof, and hazard prevention.
First, anti-theft during the renovation, Utah is the interior of the windows, anti-theft network, etc. did not do a good job, pay attention to the gentleman on the beam ready to move.
I have seen at least two family members: one is a dwelling and one is a canteen. The destiny of the two is the same: on the same floor, the entire floor was also stolen from the aluminum alloy glass window, leaving only a border of light and light. Therefore, be sure to send people on duty in the workplace.
In addition, in the decoration workshop must also prevent internal thief. Stealing tools, stealing supplies from the factory. In particular, if the contractor does not include materials, the owner or the management must also be arduous.
Second, fire prevention
1, banned on the factory fire, smoking. The "No Tobacco?" warning board should be posted clearly.
2. Do not pull the wires unprotected by the insulation pipe. Temporary wiring should be kept away from flammable materials.
3, must cook in the workshop, must be carried out within the specified range. The area should be free of fire hazards.
4, must be absolutely prohibited in indoor fire heating. Keep indoor ventilation at all times.
Third, waterproof
1. It is recommended that the decoration materials should be 20-30cm high when stacked. Make it off the ground.
2, be careful with water, especially before the drainage system is not done. Workers bathing in the factory are to be repeatedly told.
3, leave the workshop, check the tap is tight.
4. Workers who do not understand the construction of pipelines must not engage in the construction of water supply and drainage.
5, laying solid wood flooring or composite flooring, should pay attention to the problem of waterproofing in the adjacent area.
6. When no one is on duty, close the window. If you are in a period of ventilation, try to avoid the typhoon season.
7. Regularly clean the drainage holes so as not to cause flooding accidents due to blockage.
Fourth, anti-danger
1. Decoration materials are properly placed and sharp-edged items should be properly protected to prevent collision and injury. .
2, small metal accessories to be placed properly, but it is a nail. If nails are nailed on waste wood boards, they must be bent and pressed in time.
3, high-altitude operations should do a good job security measures, equipped with enough high-altitude operations equipment.
4. To stabilize the ceiling project, install the lighting fixtures, etc., be sure to hit the expansion screws and play a little more to prevent accidents.
5. All types of construction machinery should be operated by the officially trained personnel and necessary safety measures should be taken. Utah must be careful about the safe use of chainsaws, high-pressure nail guns and other machinery.
Although the risk of renovation projects can not compare with the construction industry. But still be careful.
V. Protection against electricity
1. The row of wires should not be walked on the ground, and it should not be rolled on it.
2. The electric conduit must not be allowed to pass through the water, so as to avoid personal injury caused by electric leakage.
3, If the surface of the wire pipe is damaged, it should be replaced in time.
4. Install the necessary grounding wire and leakage protection switch in the power box.
5. Electricians should be responsible for the electrician who is formally trained.
Sixth, anti-chemical
1. Carefully place various chemical materials and take certain cut-off measures.
2. During construction, construction should not be carried out in too large amounts and maintain a certain limit.
3, debugging paint, paint construction, etc. should maintain indoor ventilation.
4, use chemical materials, to bring good protective gloves and other protective measures.
5, for unknown objects or materials, remember not to take random touch.
6. Do not deploy chemical raw materials without the guidance of experts.
7. Strengthen safety protection for strong acids, strong alkalis and strong volatile materials.
Decoration Construction - Construction Safety