In the twinkling of an eye, the heat of March 15 has quietly passed, and the beautiful spring will fade away. The beautiful Hainan Island will also usher in the summer with high sunshine. And May 1 is also the peak season of the home furnishing industry. Various promotional activities will come to you. Will you be able to face the various kinds of tiles in the new home? Let's introduce a few simple tile resolution methods to let you Buy bricks with ease. 1, look Mainly to see whether there are black spots, bubbles, pinholes, cracks, scratches, stains, missing edges, and angled vitrified tiles on the surface of the tile, please pay attention to whether there are defects such as leakage and leakage. Look at the bottom mark of the embryo. The bottom of the product produced by the regular manufacturer has a clear product mark. If it is not or is particularly blurred, it is recommended to be careful! 2, 掂 It is the weight of the enamel, the feel of the test tile, the same specification product, the good quality, the high-density brick feel is relatively heavy, on the contrary, the quality of the product feels lighter. 3, listen By tapping on the tiles and by listening to the sound to identify the quality of the tiles, the following two aspects are introduced according to the kitchen wall tiles and vitrified tiles: Tap method: 1) Wall tiles or small-size tiles are generally separated by one hand and five fingers, holding up the tile, and the other hand tapping the tile face. If the sound is metallic, the quality of the tile is good. 2) The floor tiles (the living room and other floors are made of vitrified tiles or antique bricks), lift the side of the tile with one hand, and tap the middle of the tile with the upper part of the palm of the other hand, if the sound is loud and the echo is long. If the sound of the bronze bell is struck, the ceramic tile has a higher degree of porcelain, high wear resistance, high flexural strength, low water absorption, and is not susceptible to pollution. If the sound is turbid and there is no echo, the degree of porcelain is low (even exists). Crack), the ceramic body of the ceramic is not fully calcined, the wear resistance is poor, the bending strength is low, and the water absorption rate is also high. Such a vitrified brick is highly susceptible to contamination. 4, fight The product of the same specification and type can be taken out at random for 4 pieces, and the tiles can be laid. Through this step, the three dimensions of the tile size, flatness, and straight angle can be checked. 5, try Mainly for the anti-slip problem of floor tiles. The material is mainly divided into two kinds of vitrified and glazed. For the anti-slip problem of the current tile, now everyone's common practice is to add water on the brick surface, and then step on it to see if it is slippery. This is actually not It's all right, because some tiles, especially vitrified tiles, will feel more involved when added with water. The principle is similar to adding water between glass. If you want to pry the glass, it is difficult because water The air in the middle is squeezed out, so that the brick and the upper are in closer contact, so it feels more involved, and some vitrified tiles feel slippery when no water is added. For this, it is recommended to add water and not water. Try it as well!
10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1．
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2． When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3． After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4． Avoid to use
the glue gun under very hot or very cold environments.
5． Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7． Not
applicable for bonding heavy objects or objects needed strong adhesive
8． The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9． If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10． This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance
with flammable material.
12． Not applicable for a long time in the same
place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible
materials.
15． Do not leave equipment unattended when switched
on.
16． This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Mini Glue Gun 10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun