Hardware accessories classification and purchasing methods

In general, ordinary hardware is divided into hinge slides, decorative handles, and decorative locks by setting methods; special hardware is divided into bathroom hardware and kitchen pendants by setting method. In the purchase of hardware accessories, you should choose a good sealing performance hinges, slides, locks, hinges; choose a good performance and good locks, when you purchase can have a key to plug a few times to see Shun not smooth, switch screw up Provincial strength; selection of good appearance and decorative hardware.

Hardware classification and purchase methods 1, hinge hinge type hardware main types of door hinges, drawer rails, door hinges three. Door hinges are available in both copper and stainless steel. Single sheet hinge area standard is 10cm×3cm and 10cm×4cm, center axis diameter is between 1.1cm and 1.3cm, and hinge wall thickness is 2.5mm to 3mm. When the hinge is selected, it is easy to open without noise. It is better to have a ball bearing in the shaft of the page.

2. Guide rails The drawer rails are divided into two sections: two section rails and three section rails. The brightness of the exterior paint and plating is selected. The clearance and strength of the load-bearing wheels determine the flexibility and noise of the drawer opening and closing. Should be selected for wear and rotation uniformity. The load wheel.

3. Hinge door hinges are divided into two types: detachable and non-detachable, and the cover position is divided into three types: large bend, medium bend and straight bend. In addition to the visual inspection and smoothness of the surface of the hinge, the hinge should be carefully removed. The hinge can be opened by 95 degrees and the hinges can be pressed by hand. It is observed that the support spring is not deformed or broken. It is very strong. For qualified products.

4, pull hand-in-hand materials are zinc alloy, copper, aluminum, stainless steel, plastic, logs, ceramics and so on. In order to match with various styles of furniture, the shape and color of the handle are varied and colorful. Electroplated and electrostatically sprayed handles have a wear-resistant and anti-corrosive effect. When selected, they should be able to withstand large pulling forces in addition to the decorative style of the room. Generally, the handle should be able to withstand more than 6 kilograms of pulling force.

5, baseboard skirting board is often overlooked, in fact, the kitchen cabinet may first be the problem. Because it is closest to the ground, if the ground is very wet, it is likely to be swollen and moldy. There are two types of baseboards: wooden baseboards and matte metal baseboards. Wood baseboard manufacturers generally use the corner waste left when the cabinet body is used, and the cost is low. However, due to the close distance between the skirting board and the ground, the wooden material easily absorbs moisture and the water vapor rises along the skirting board and endangers the entire cabinet.

6, steel pumping, knife and fork plate steel extraction, cutlery tray size accurate, standardized, easy to clean, not afraid of pollution, will not be deformed, for the maintenance and use of kitchen cabinet drawers, has its irreplaceable role, has long been Germany, Kitchen cabinet companies in the United States, Japan and other developed countries are widely used. Therefore, when you roughly observe the appearance of the kitchen cabinet, you should open and look at each drawer. If you use a combination of steel extraction and knife and fork tray, it means that the product cost is higher, and the kitchen cabinet combination is more standard, and vice versa. Drawers are less expensive.