Henan Huanghe Industrial Group Co., Ltd. is a national high-tech enterprise, a national-level innovative enterprise, and a national intellectual property innovation model enterprise. It has a state-level enterprise technology center, a post-doctoral research station, a diamond standardization working group, and a diamond photoelectric material in Henan Province. Four provincial key laboratories and engineering technology research centers, including the Key Laboratory of Devices, established five university joint experiments and one independent enrollment professional department of Beijing Institute of Technology Intelligent Manufacturing Laboratory. The company's leading products are carbon-based new materials (superhard materials and products, super-hard composite materials and products, graphene, diamonds for jewelry), intelligent manufacturing, new energy lithium-power batteries, special vehicles, raw and auxiliary materials, UDS series diamond pressure Machines, construction machinery, pressure forming equipment, etc., are the world's largest synthetic diamond manufacturing base, ranking first in the world. Its backbone enterprise Henan Huanghe Cyclone Co., Ltd. was listed in 1998 and became the first privately-owned enterprise in the national superhard materials industry. Serial number Position Title Number of people required Education Professional requirements job requirements 1 Carbon Materials Senior R&D Engineer 2 Doctor Carbon, superhard materials Well-known in the field of diamond manufacturing, have strong research enthusiasm and ability in new fields and technologies of carbon materials 2 Synthetic Diamond R&D Engineer 1 Doctor Condensed matter physics, inorganic non-metallic materials, high pressure physics, artificial crystals 1. Have the basic technology of high-pressure synthesis, familiar with the synthesis of super-hard materials, and have relevant product research and development work experience for more than 1~2 years; 3 Superhard Materials R&D Engineer 8 master's degree Inorganic non-metals, materials, electrochemistry, high pressure physics, condensed matter physics 1. Have the basic technology of high-pressure synthesis, familiar with the synthesis of super-hard materials, and have relevant product research and development work experience for more than 1~2 years; 4 Wheel material development engineer 5 master's degree Metal materials science 1. Emphasis on black, non-ferrous metal direction or resin, ceramic, metal adhesive direction; 5 Lithium-ion battery research and development engineer 5 Graduate and above Electrochemical, electrode material 1. It has the evaluation ability of the four main materials of the positive electrode, the negative electrode, the separator and the electrolyte of the lithium battery, and the design and application of the power battery and the evaluation of the electrochemical performance requirements. 6 accounting 3 Bachelor and above Accounting, financial management 211, 985 college graduates or above, or intermediate accounting titles 7 Electrical Engineer 10 Bachelor and above Electrical, mechanical or related major 1. Familiar with R&D, manufacturing, process control and product performance of electrical equipment such as high and low voltage switchgear, box substation and ring network cabinet. 8 Mechanical engineer 10 Bachelor and above Mechanical major (including hydraulics), automation 1. Proficiency in mechanical design related standards, skilled use of AutoCAD, CAXA, Solidworks and other design software. 9 Powder metallurgy engineer 2 Bachelor degree or above Material class 1. Familiar with the preparation principle and preparation method of powder metallurgy and powder materials; 10 Material process engineer 2 Bachelor Mechanical design and related majors 1. Familiar with mechanical design, mold fixture design or CNC system 11 Lithium battery process engineer 5 Bachelor degree or above Material and chemistry majors 1. Familiar with battery manufacturing equipment and understand the performance characteristics of common equipment; 12 Tool technical engineer 5 Specialist or above Superhard material products 1. The work is serious and responsible, the cutting tool industry has a strong interest, and the recent graduates are preferred; 13 Pack engineer 5 Bachelor degree or above Electrical automation, electronic design and other related majors 1. Familiar with control theory, power electronics, analog circuits, etc., to understand battery balance management; 14 Tool operation engineer 5 Specialist and above Mechanics 1. Experience in operating the equipment is preferred; 15 Chemical examiner 3 Specialist Analytical Chemistry, Applied Chemistry, etc. 1. Familiar with and master the chemical inspection process and inspection methods; 16 Equipment and after-sales engineers 3 College and above Mechanical, electrical, and mechatronics 1. Familiar with the working principle, maintenance, maintenance and repair of automation equipment 17 Trade commissioner 2 Bachelor degree or above International trade, English 1. Familiar with foreign customer order processing, order production delivery schedule and customer email reply. 18 Marketing representatives and e-commerce 10 College or above marketing, 1. with relevant expertise, good at learning summary. Contact information Contact: Mr. Huang Mr. Li 18637436765 Resume delivery email: position + name + education + professional sent to WeChat public number: HHJT0809 (Yellow River Industry Group) Company Address: No. 200, Renmin Road, Changge City, Henan Province Company website:
Insulator Hardwares
Insulator hardware for Poleline Hardware refers to the components used to support and insulate electrical conductors on utility poles. Some common insulator hardware used in poleline installations include:
5. Strain hardware: Strain hardware is used to absorb and distribute the mechanical forces exerted on the conductors due to wind, ice, or other external factors. It includes components such as strain insulators, strain clamps, and dead-end fittings.
6. Crossarm braces: Crossarm braces are used to provide additional support and stability to the crossarms, which hold the insulator strings. They are typically made of steel or other sturdy materials and help to prevent sagging or swaying of the conductors.
Yokelink Insulator Hardware are mainly used in transmission lines. It is used to connect crossarms, thereby joining the crossarms. By joining crossarms together, they are made stronger and more resistant to vibration.They are attached in cross arms of overhead transmission lines for supporting and connecting the crossarms by means other than welding. They join two crossarms or a cross arm with an insulator mounted on it. It is also put into one crossarm for joining cross arms together.
Insulator Clevis, Post Studs, Pole Top, Forged Pin, Insulator, porcelain, Deadend Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com
2. Being able to engage in technology development and management for a long time
2. Being able to engage in technology development and management for a long time
Condensed matter physics
2. With certain material preparation and metal sintering improvement ability.
2. Familiar with material development, process development, process optimization, performance testing
3. With the development and design of leading new products, and familiar with high-capacity, high-circulation, high-rate and wide temperature product systems.
2. Skilled in using CAD software, familiar with current electrical engineering design specifications and application professional technical standards.
2. Have a certain understanding of material mechanics, hydraulic transmission, pneumatic transmission and automation standard parts.
2. Familiar with the main equipment, experimental instruments, software usage methods and basic principles of this major;
3. Lead the team to develop new products and form sales.
2, skilled use of related design software
3. Good at communication and coordination, with good team spirit, professional ethics and literacy
2. Familiar with quality handling techniques, design experiments, optimization of processes, with DOE/DFMEA/PFMEA experience;
3. Familiar with battery core structure and conventional lithium battery material design parameters.
2. Skilled in using AutoCAD 2D graphics software, proficient in using UG, solidworks and other 3D graphics software;
2. Familiar with technical indicators of electrical components such as high and low voltage relays, connectors and wiring harnesses;
3. Proficiency in common electrical components, interfaces and corresponding technical indicators (such as CAN);
2. Familiar with mechanical processing drawings, can independently complete related work
2. Experience in chemical testing is preferred.
2. Skilled application of PLC and mechanical design software
2. Familiar with the operation of various network platforms, and have the ability to independently develop customers.
Machine made,
Electromechanical
2. have good communication skills, ability to innovate.
3. has a good attitude, full of enthusiasm. 
1. Insulators: Insulators are typically made of porcelain, glass, or polymer materials and are used to prevent electrical current from flowing through the pole or other grounded structures. They provide electrical insulation and mechanical support for the conductors.
2. Insulator pins: Insulator pins are used to secure the insulators to the crossarms or other supporting structures. They are usually made of steel or other durable materials and come in various designs to accommodate different types of insulators.
3. Insulator Clevis: Insulator clevis are comprised of multiple insulators connected in series to provide the required electrical insulation for the voltage carried by the conductors. The number and arrangement of insulators in a string depend on the system voltage and other factors.
4. Suspension hardware: Suspension hardware includes various components such as suspension clamps, suspension insulators, and suspension links. These are used to support the weight of the conductors and insulators, ensuring proper tension and alignment.
The Insulator cross arm pins have three parts – the crossarm pin base, a crossarm pin body, and the crossarm pinhead. The cross-arm pin base is fitted in an opening of a cross arm.The cross-arm pin body connects the cross arm with another cross arm or a crossarm insulator. The crossarm pinhead is placed on the top end of the cross-arm pin body and holds it into position so that it cannot move outwards.
Abstract Henan Yellow River Industrial Group Co., Ltd. is a national high-tech enterprise, a national-level innovative enterprise, and a national intellectual property innovation model enterprise. It has a national-level enterprise technology center, a post-doctoral research station, a diamond standardization working group, and a diamond photoelectric material in Henan Province. ...