How to choose bathroom tiles?

The bathroom is an important part of home improvement. Therefore, it must be done with care during the renovation. In addition to basins, toilets, showers, faucets and other necessary bathroom products, tiles are also a key element in bathroom renovation.

One is to identify the water absorption rate. High-quality wall and floor tiles have low water absorption rates, and tiles with high water absorption rates undergo thermal cracking and shrinkage and cracks and peeling occur on the tile surface. Identification method: some tiles indicate the water absorption rate, and can be directly compared; if not indicated, you can place water droplets on the back of the tiles, observe the degree of penetration of the water droplets after a few minutes, the less water absorption, the lower the water absorption rate. The better the quality. The second is to identify the brick surface. Check whether the brick surface is flat and whether the thickness appears...

One is to buy tiles, pay attention to its resistance to cracking and strength. Good quality tiles have low water absorption. The surface of the tile with poor resistance to glaze cracking, low strength and high water absorption is prone to irregular fine cracks, which are commonly referred to as late cracking or crushing and spalling. Therefore, the consumer can drop water on the back of the tile to observe the degree of diffusion and absorb water slowly. Second, it is necessary to pay attention to whether the surface of the tile is smooth and whether uneven pinholes occur. selected...

The bathroom is a place where moisture is relatively large. Therefore, special attention will be paid to the selection and use of ceramic tiles. So, what tiles are good for the bathroom? The following Xiao Bian will explain to everyone one by one. Non-slip articles Wet toilets can easily wrestle, so we must give priority to the anti-slip property of bathroom tiles. It is advisable to choose full-body bricks or glazed glazed tiles. If the tiles are not glazed, the surface will be smooth and smooth. Water absorption

First, tap the tile to hear the sound is crisp, the sound is more brittle, the degree of porcelain, the higher the density, good hardness. 2. If the tiles are scratched with sharp objects, if the scratches indicate that the difference between the glazes is easy to slip, the surface of the glaze will be polished and the brick surface will not be clean. Third, the back of the tile drops a few drops of tea juice or water, wait a few minutes later, depending on the degree of inhalation of water droplets, non-absorbent or low water absorption is good quality. Fourth, tile color, color clarity, natural, ...