How to decorate a three-story building in rural areas? Rural building renovation strategy

With the country's economic prosperity, the countryside has also developed greatly. The peasant brothers also have money in their hands, and more and more houses are being built in rural areas. Do you know how much money is needed to renovate a house in a rural area ? If it is a three-story building in a rural area, how much does it cost? Many friends are afraid that they don’t know much about it, so the next step is to take a look at the flowers of the rural house. Sell ​​it, I hope I can bring some friends to the reference and help.


农村三层楼房装修


How much does it cost to decorate a three-story building in rural areas?

The process of renovating a house in the countryside is actually similar to that of a city. Due to the different prices of decorative materials and wages, the cost of decoration is calculated according to the price of decorative materials. Therefore, it is difficult to have an accurate figure for how much money is needed to renovate a house in a rural area. However, there is also an overall estimate. Relatively speaking, the renovation fee of 400-500 yuan/square meter in rural areas has been very high-grade. According to this standard, a rough calculation can be made for the cost of rural decoration.


If you only need simple decoration, kitchen, bathroom simple ceiling, stove, cabinets are clean and easy to use, buy some simple and practical door sets, window sets, lamps do not seek luxury as long as simple and practical, take into account the price of building materials everywhere Affected by the level of consumption, we calculate according to the general market conditions of rural areas in the third-tier cities. A 100-square-meter rural house will cost about 30,000-50,000 yuan for renovation. Although this is only a rough estimate, it can also reflect the current rural decoration market. Of course, in rural areas, sometimes the cost of some masonry, material transportation, loading and unloading may be low, or even not included, the total price has room for compression, and an average of 40,000 yuan is also reasonable.


How much does it cost to decorate a three-story building in rural areas?


农村三层楼房装修


The area of ​​a three-storey building in rural areas is about 200 square meters. Generally speaking, the first floor of a rural building is about 80 square meters. The top floor is generally unoccupied, only half a floor high. It is mainly used to prevent the top floor from leaking. The decoration is also very good. simple. The decoration of the village is now divided into three grades, which are low grade, the unit price is 300 yuan / square meter; the mid-range 400-600 yuan / square meter; high-grade 700-1000 yuan per square meter. In this way, a three-story rural building is decorated at a low standard price of about 60,000 yuan; the mid-range decoration standard price is about 8-12 thousand yuan; and the high-end decoration standard is about 140,000 yuan. It depends on the strength of the master's attention.


If you want to save money during the renovation, you can consider it from two angles. First, since it is a rural house, don't pursue too much European or American style. The simple rural style is very good and economical. Second, in the Buying materials, there is no need to pursue too high-end, for example, buy latex paint, what five-in-one or three-in-one, regardless of the second or third generation, buy the more famous brands of ordinary goods, because they feel that they are The difference is not big, and the effect of use is not very different.


Whether it is on television or in real life, in recent years, three-story buildings in rural areas have sprung up in every rich village. So if it is in the countryside, how much does it cost to decorate a house? How much does it cost to decorate a three-story building in a rural area? Have you been surprised to see the above introduction?



More related wonderful reading:

Duplex building decoration point

How to decorate the building? Precautions for building renovation

Temperature Transmitter

Temperature transmitter is an instrument that converts a temperature variable into a transmittable standardized output signal. Temperature transmitters convert physical measurement signals or ordinary electrical signals into standard electrical signal output or devices that can output in the form of communication protocols. A temperature transmitter is an instrument that converts temperature variables into a transmittable standardized output signal, and is mainly used for the measurement and control of temperature parameters in industrial processes. The current transmitter is to convert the AC current of the main circuit under test into a constant current loop standard signal, which is continuously sent to the receiving device

Features of the temperature transmitter:

1. Two-wire output DC4-20mA current signal, strong anti-interference ability;

2. Save the cost of compensation wire and installation of temperature transmitter;

3. Large measurement range;

4. Automatic compensation of cold junction temperature, non-linear correction circuit.

Applications of temperature transmitters:

Usually used with display instruments, recording instruments, electronic computers, etc., widely used in petroleum, chemical, chemical fiber; textile, rubber, building materials; electric power, metallurgy, medicine; food and other industrial fields for on-site temperature measurement process control; especially suitable for computer measurement and control The system can also be used in conjunction with the instrument.

Temperature transmitters make it possible to send a scaleable (4 to 20) mA signal from a Temperature Sensor to a control device without investing in long, expensive runs of thermocouple or RTD wire.

Pt100 Cu50 Temperature Sensor2

Pyromation carries programmable RTD and thermocouple temperature transmitters that can be mounted in the temperature sensor assembly connection head, or surface mounted using a DIN rail mounting clip. Some units offer a visual digital display that shows the current measured value. All are PC programmable and convert various signals into a scaleable (4 to 20) mA analog output signal. We also carry transmitters programmable with Hart® protocol for various signal inputs. Depending on type, some of Pyromation`s thermocouple and RTD temperature transmitters are UL recognized components and/or FM and CSA approved, including styles that are intrinsically safe and approved for use in hazardous locations.

Liquid Temperature Sensor And 420ma Temperature Sensor With Temperature Data Logger1

Pyromation temperature transmitters are used in many demanding industries including Pharmaceuticals, Oil & Gas, Power Generation, Chemical, PetroChemical, and Food and Dairy.

Temperature Transmitter,Temp Transmitter,Thermocouple Transmitter,Rtd Temperature Transmitter

Wuxi Winsun Automation Instrument Co., Ltd , https://www.winsunwx.com