LINEAR FLOOD TWIN LIGHT was born for supermarkets. It has outstanding optical performance and super stylish appearance. Its functions are also very powerful. Adjusting the illumination angle and low glare are its basic configurations. The best match for large-scale commercial supermarket lighting. Panel Light Led,Suspended Light Ceiling Panel,Track Light Hanging,Flexible Track Light,Led Lighting Fittings SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com
Twin Panel Linear Lights, as the name suggests, is a combination of line lights that look like two panel lights, which can emit the soft light of the panel lights without losing the modern beauty of the line lights.
LiteHome provides you with linear lights with diversified installation methods.
Three roller gates, swing gates and wing gates are used more and more frequently in our daily life. Different gates are used in different situations. How to maintain three roller gates, swing gates and wing gates, as a manufacturer, has responsibilities and obligations Discuss with everyone. In the previous article, "How to Maintain Three Roller Gates (Three Stick Gates)", here we discuss with you how to maintain swing gates and wing gates. The maintenance of swing gates and wing gates is basically the same as the maintenance of three-roller gates, but the structural principles are different, and the maintenance is somewhat different. You need to pay attention to the following points:
1. Chassis maintenance and care
The case of swing gate and wing gate is sprayed or painted with 304 stainless steel and electrolytic plate (A3 plate). The stainless steel case will have rust on the surface after a long time. Use sandpaper and green gauze and fossil powder to clean the case, and the sanded surface will be along the long The texture rubbing (to protect the direction of the thick texture) will otherwise affect the appearance. The mirror-finished surface is polished with polishing wheels and polishing wax, and the conditional surface is coated with anti-rust oil. For the case of spraying and painting, use a soft cloth to wipe off the dust. If the surface is scratched, use the same color paint to make up. Remember not to paint the radio eye area. The gate and wing gate will falsely alarm, causing unnecessary trouble.
2. Maintenance of the movement
Turn off the power, open the cover, clean the dust on the surface, spray the transmission part with butter, remove the motor from the swing gate, apply the butter to the gears and wheel grooves, fix the motor in its original position, and check whether the coupling screw is loose. , Tighten, do not adjust the limit switch and limit metal sheet casually, the gap of 1-2mm is too far away to be sensed, too close is easy to damage.
3. Maintenance of power supply
Turn off the power, remove the dust on the surface, check whether each plug is loose, plug it in, tighten it, do not change the wiring position at will, whether the external power supply is exposed, bandage it in time, and if there is leakage, deal with it in time, refer to the instruction manual, and check the interface Whether the technical parameters are normal, replace the aging electronic components in time.
The above-mentioned swing gate and wing gate maintenance must be maintained by professionals, especially the movement and electronic control parts. First cut off the power supply and operate safely. Professional training is required to fully understand the strong electricity and weak points before you can start the operation.