Indoor construction general basic flow

1. If there is a need to demolish the wall and re-build the wall, it shall be carried out first; then, the water and electricity shall be modified. Including the fixed switch socket position, according to the requirements of pulling hot and cold water pipes, pull wire, water pipe with aluminum plastic pipe, wire with international wire jacket PVC pipe.

2. After the acceptance of water and electricity is qualified, the woodwork enters the field, and the cementworker kitchen and bathroom wall is waterproofed and tiled. Woodworking includes hanging ceilings, making various cabinets, decorative walls, doorways, window coverings, etc.

3. After the carpentry is completed, it is the varnish on the wood veneer and the wall of the ceiling, and the latex paint. About 8 times of environmental protection paint on the wood veneer, depending on the flatness of the gray wall, the average house is about 3 times smoother, and the poorer one is 6-8 times. Paint, general Nippon Paint, ICI brush 3 times, Dulux Brush 2 times.

4. After the ceiling wall is finished, begin to floor tile or wood floor. The ground should be leveled first. Now the average flatness of the house is sufficient. If it is poor, you need to do another leveling of the cement mortar. In addition to laying the solid wood floor, you must first use the plywood to make the bottom, then spread the damp-proof cotton before laying the wooden floor. However, composite wood floors generally do not require large floors and can be laid directly on.

5. After the above items are completed, the rest is to install sanitary ware and lamps.

The entire renovation will be completed. The entire construction period will be about 50 days. If your project is greatly increased or decreased, the construction period will be increased or decreased accordingly.

Construction acceptance paint latex paint cement house switch floor tile door cabinet door door tile adhesive floor tile