Processing Machinery,Manual Winches,Hydraulic Guillotine Shear,Four Columns Hydraulic Press Machine Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaous.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>å•¥ is a mosaic bearing å•¥ is inlaid bearing
On the metal collision surface of the bearing base; open the orderly, fine-grained holes or grooves; insert the formed solid lubricant; form the inlaid bearing. Also use solid lubricant emulsion (such as PTFE emulsion) to write these holes or slots Cured. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
It is characterized by high bearing capacity and long working life. Compared with sintered bearings; although its collision factor is higher, the wear rate is one order of magnitude lower than that of laminated bearings; it has higher service life and heat resistance. Compared with carbon graphite bearings; its wear rate is low.
The base metals used as inlaid bearings are: cast iron, stainless steel, tin bronze, brass and lead-bismuth alloys. Inlaid bearings are mostly made of solid lubricants with composite components; mainly graphite, PTFE and MoS2. The formula can be used as a mosaic with the same linear expansion coefficient as the matrix data; it can be used under the customary high temperature conditions; it can also be made into a mosaic that can accept low speed and heavy load, water resistance and chemical solvent resistance.
Recommend to friends comments close window Bearing related knowledge The effect of metal wear self-correcting skills on the bearing life of several common bearing damages
FAG's optimization skills for reloading bearings and fine parts
NSK high-speed fine spindle bearing function features analysis of rolling bearing condition monitoring and fault diagnosis practical skills
This article links to http://
Please indicate the bearing network http://
Previous: Bearing fault repair next edition: INA thin-walled bearings in the production of parts in the process of "key door critical inventory"
Source: China Bearing Network Time: 2013-04-09