Paint process notes What are the paint process steps?

In fact, we often use paint to decorate, most of our carpentry will use lacquer, and this decoration is also the art of the door, because the lack of attention, the technical inferiority will make the whole effect plummet. The knowledge here is also very deep, and there are many things to pay attention to. In fact, this process has been for many years. But when you buy, you must go to a regular sales company to buy, at least this material is safe. Next, let's learn about the paint process together with Xiaobian.

First, the paint process considerations

1. In fact, paint should pay attention to air weathering paint during construction. If it is too wet, it will dry very slowly. The slowness of the work will affect the next step. If forced construction will affect this quality. But the dry block is not good. Cracks appear too dry, which is even more unsatisfactory. Therefore, we must use paint carefully when we are constructing. Don't be too dry, but not too wet.

2, some of our friends have a deep color, to dress up our room. Can you say that everyone has different requirements for color. Like deep color friends, don't mix thinner when decorating your room. Because this doping will cause a large color difference in the color of our room, the overall effect will be greatly reduced.

3, this material can be said to be very flammable, if in the dry season, you should put these things in the shade. To avoid something other than happening. Avoid some security risks. And you must go to the regular business to buy at the same time you buy, to see the country's requirements for this material, the material of the business has reached. These are not visible to the naked eye. If these materials are not produced in accordance with national standards, then the use is very dangerous. So everyone remembers this.

4. When you are decorating, if some stains appear, it will affect the effect. Therefore, pay special attention to these during construction. If you want to avoid these problems, then before the construction, first brush a layer of aluminum powder primer in the painted area. If you do this, you will generally not have this problem.

Second, what are the paint process steps?

1. Before we put in the construction, we should clean up some dirt on the wood, such as ash and some dust, so that we will not have any problems when we are constructing. Moreover, the thorns on the wood material are cleaned before the construction, the crack defects are repaired, and these things are polished with sandpaper. The corners and corners are neat.

2. When we are operating, we first use a transparent brush to scrape. After the putty is applied, it is polished with coarse sandpaper. After doing it, repeat it. Use our sandpaper. Generally three layers of paint will do. The reason for the paint falling off is not strong if the paint is light or powdery. Also, the surface of the wood is not smooth. In this case, you need to polish it with sandpaper and fix the uneven area so that the material will not appear rust.

The above is the introduction of this small series for everyone, the paint process notes and paint process steps. If you want to know the friends of the paint process, you can refer to this small series for everyone to introduce. I hope to help you. If you want to know more about home improvement information, please continue to pay attention to the decoration home network.

More related wonderful reading:

What are the paint processes and what are the wood paint process classifications?

Painter construction details paint process considerations

How is the paint process going? The detailed process teaches you

How the paint process carries out a detailed process to teach you

Wall decoration is easy to crack, spring is wet, pay attention to paint process

Home decoration three points woodworking seven points paint mastering paint process matters