[Automatic Switch, Free Your Hands]: Cabinet light has two working modes, Motion & Light Sensor Mode, Always On and Off Mode. In G mode, this counter light automatically turns on when it senses human motion within 10 feet in a dark environment, and automatically turns off after 20 seconds of inactivity. You can use these lights as normal light or safe light. Solar Motion Light,Best Outdoor Motion Sensor Lights,Indoor Motion Sensor Light,Outdoor Sensor Lights Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlights.com
[Upgraded Version & More Bright Sensor Closet Light]: With 20 LEDs(Not 10 LEDs) for each light, up to 160 lumens, more bright than other LED closet lights in the market, very easy to find what you're looking for and perfect to light up in a large space where there is no light system, like the cabinet, wardrobe, stairs, etc. HIBOITEC motion sensor light is the best choice for you.
[Larger Battery Capacity & Rechargeable]: Built-in 1000 mAh high-capacity rechargeable battery, has larger battery capacity than other led cabinet lighting, easily to charged via USB. After fully charged, these closet lights last for up to 8 hours under on mode and last 1-2 months under motion sensor mode. NEVER replace AAA batteries frequently. Energy Save & Save More Money!
[Two Ways to Install]: Easy to install and remove without any other tools. Using Magnetic Back Design, can stick on any ironwork, allows you to change the its location you need. Or you can use the included tape to attach the iron to any non-ferrous product surface. When you need to charge or change position, you can take down the closet lights at any time.
After years of development, China's pump business has been greatly improved, but in the actual work process, there will be unexpected situations, these failures may have a tremendous impact on the work. This is followed by an example of dosing pump failure and troubleshooting. Quantitative pump fault solution 1, quantitative pump fault: Pump does not spit oil fault Solution: Check the motor direction, correct; check the shaft, clean the oil filter. 2, quantitative pump failure: a lot of noise Troubleshooting: Clean the oil filter; the oil return pipe submerged under the oil; or replace the pump. 3, quantitative pump fault: feeding does not move or stop the fault solution: press the manual key; increase the pressure, flow setting value; adjust the material supervision time or replace the solenoid valve; or even clean the solenoid valve. 4, quantitative pump failure: can not be fully automatic operation solution to the problem: the proximity switch to adjust properly; press the timer automatic key; replace the solenoid valve or cleaning the solenoid valve; check the circuit. 5, quantitative pump fault: unable to work semi-automatic fault solution: the proximity switch to adjust properly; replace the solenoid valve; before and after the security door closed; check the circuit. The above 5 cases quantitative pump work more common fault, but in the actual work process, resulting in quantitative pump does not work or work is not smooth, there may be many reasons. However, as long as the worker is calm and calm according to the actual situation, he should deal with it calmly. When faced with a very troublesome fault can query information or consult the relevant experts.