Opical Fiber Concrete which is New, safety and high quality Optical Fiber Concrete,Fiber Optical In Concrete,Optical Fibers In Concrete,Fiber Optical Conctete Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com
* Low-loss optical window in the light-visible area, and ability to transmit visible light from end to end, but not including ultraviolet or infrared light
* The impression given by traditional concrete is always murky, but this dark-colored, lifeless concrete may be about to become a thing of the past. combining traditional concrete with fiber optics cable can produce transparent concrete. Combining the fair-faced concrete technology with light-guiding materials, through product research, the light-transmitting concrete is made into garden building products, decorative plates, decorative blocks, transparent concrete bricks, wallboards, etc
* As long as the light is shining on one side of the light-transmitting concrete (monochromatic light or 7 color light), it will be able to see these lights (non-guided infrared light) from the other side of the concrete. These lights can be both chaotic and heavenly like the star in the sky; it also can be arranged in different shapes according to actual needs, such as characters, text, drawings, etc.. Because the concrete itself has solid, heavy-duty, thermal insulation, light and transparent materials, and concrete composite can be made into garden construction products, decorative plates, decorative blocks, can also be used to make a variety of building materials.
* Light-transmitting concrete has a good working performance and a wide application prospect, as follows:
- Light transmission concrete light guide material is evenly distributed and has good light transmission performance. It can transmit visible and infrared light of different wavelengths, which greatly saves the general architectural lighting loss. It is a kind of green and low carbon building material. Works of different textures and colors have significant architectural energy-saving and decorative effects.
- Light-transmitting concrete has good thermal insulation properties and is used in accordance with related materials. It can be used in indoor fire escape, night guidance, and other special fields, and improves the safety of buildings, especially high-rise buildings.
- Compared with ordinary concrete, the light-transmitting concrete's bending strength is greatly improved, and various shapes can be made according to building requirements, which expands the practicality and applicability of building materials.
- Light-transmitting concrete This type of wall itself has a high appreciation value. It has great potential for application in hotels, restaurants, villas, and other buildings that require decoration, and provides a material basis for further improving the architectural aesthetic effect.
* No conductivity or heat transfer(Through the fibers no electrical power is sent, they remain always cold )
* Reduced energy cost
* No electrical hazard
* Long life-time
Diesel fuel injection pump and the oil connected to the formation of a sealed circuit, when the original body of air, the diesel should not be on the oil and stop working. At this time, the driver should first check the tank of diesel oil inventory, whether it ran out, into the throat tubing is to leave the oil surface; the second is to check the fuel tank outlet is blocked, resulting in the formation of vacuum negative pressure oil can not, and then Release the pump in the deflation screw loose, hand pump oil, if there is a large number of bubbles or foam appears, and feel unpleasant fuel supply, indicating low-pressure oil is blocked, then you should check the coarse and fine diesel oil filter Cleaner is clogged, tubing is cracked, deflated deflated; the tubing joints gasket was forgotten to install, or gaskets have been damaged, resulting in leakage or intake. When the hand pump oil, feel the fuel supply is smooth, but no pressure, mainly due to the fuel pump on the relief valve relief or fatigue spring deformation, ball wear or dirty pad and sealing lax , So that low-pressure oil pressure is too low caused by insufficient fuel injection pump. Check the relief valve relief valve seal effect, blocked by hand into the mouth of the mouth blowing, blowing can not move as normal, otherwise the seal is not strict, hand pump oil, tighten the handle should feel elastic, pressure When relaxed or release the handle automatically return. For the old-fashioned hand pump should also check the fuel pump inlet pipe to the tank between the oil is blocked, if most of the jam is due to the oil inlet filter below the filter is blocked by dirt or gasket damage. Pump oil by hand pump, the shaft handle feel no suction, press the handle, the feeling of resistance is large, mainly to the oil pump pump to the oil blockage. Mostly due to the injection pump screw into the oil and overflow valve installed anti-pump valve in the anti-back anti-wear or even over, hand pump rubber seals aging damage and other reasons. Such as the injector on the back of a large number of bubbles appear bubble, which is mainly due to a cylinder nozzle coupling stuck in the open position, the cylinder of high-pressure gas to the injection pump body. Remove the end of the oil return pipe connecting the oil filter, block the filter back to the oil port, the bubble disappears, indicating that the fault in the injector, and then find which cylinder injector coupling stuck, to be excluded.