In the previous article, Xiao Bian also introduced the relevant content of the baseboard. In fact, there are many types of baseboards, depending on the material, there are aluminum alloy baseboards and solid wood baseboards. The installation of the kick line has always been a headache for many owners. Let's take a look at the baseboard installation steps brought by the decoration home decoration network Xiaobian! The above is the installation method and process of the baseboard brought by the decoration house decoration network. When installing the baseboard, we must take into account the characteristics of the solid wood material, although it should be close to the wall, but it can be left at the corner of the wall. A little gap, as a space for thermal expansion and contraction. More exciting content, all in our decoration encyclopedia section! More related reading: How to install the baseboard? What are the types and functions of the skirting? How high is the height of the baseboard? Baseboard color: the right choice to embellish the comfort space
Stainless steel is a corrosion resistant steel alloy with a minimum of 10% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present. The chromium creates an invisible passive film of chromium oxide that will not let oxygen attack the surface and prevents rusting of the iron base.
Yuhong Group is a stainless steel manufactory of more than 20 grades of Stainless Steel.
Stainless Steel U Bend Tube,U Bend Seamless Stainless Steel Tube,U Shape Stainless Steel Tube YUHONG HOLDING GROUP CO.,LIMITED , https://www.alloypipeline.com
First, measuring materials
The length to be used in each area of ​​the baseboard is different, so the length of each baseboard should be calculated and measured before trial.
Second, cutting materials
After knowing how long the skirting line is needed, you can cut the skirting line and use tools such as chainsaws.
Third, drilling
Drilling is to serve the fixed baseboard. Before drilling, you need to have a general understanding of the direction of hydropower. The spacing between the drilled holes should not be too large. If the distance is too long, the skirtings may not stick to the wall. It is best to use professional tools for drilling. The specific spacing of the holes can be about 40cm. This is the case when the length of the baseboard is 2m, depending on the actual situation. The spacing at the interface should be smaller to allow the strip to be inserted into the hole. The nail that fixes the baseboard is nailed to the wooden strip to prevent the nail from loosening on the wall.
Fourth, fixed baseboard
The important point of attention for the installation of the baseboard is the fixed position. If the position is biased, it will start again, which is very troublesome. Be careful to keep the wall clean, clean, and free of bumps before fixing the baseboard. Look at the location of the hole and nail the baseboard with a nail. In this process, always pay attention to the fact that the baseboard should be close to the wall and there should be no gaps, but most of the material's baseboards have the characteristics of thermal expansion and contraction, so the baseboard of the corner is like the floor, to stay. A seam of about 1 cm. 
The cutting method of the baseboard is generally to cut the edge of the corner into a 45-degree angle, and then to fix it. This method can also make the skirting corners more beautiful and natural.
STAINLESS STEEL PRODUCTS