As the saying goes, 'Year of the year is in the spring', and decoration is no exception. As industry professionals say, 'Spring is a good time for decoration in a year'. However, during the renovation, everyone should also pay attention to some problems that are likely to occur during this season, such as waterproof and moisture-proof, as well as woodworking and masonry. Before construction, wood must be grounded Insiders pointed out that the impact of the spring decoration on the wood performance in both temperature and humidity, the temperature is too low or too high can cause adverse reactions of wood, curling or even cracking. It should be noted that the current wood market has a wide range of products from various manufacturers, and the quality varies greatly. It is suggested that owners should choose some of the more well-known brands. In addition, after the timber is bought back, it should be put in the house for two or three days. After adapting to the gas phase, construction procedures should be carried out. Before the construction, the ground should be kept dry and the moisture-proof layer should be laid. In this way, the wood will not be deformed basically. . The veneer used in the spring decoration is at the most dry time, so its surface is very brittle after it is finished. For the wood line used as the edge, the moisture content is higher than that of the veneer. After the processing of the wood line is completed, the surface should be sealed as soon as possible, otherwise there will be shrinkage, affecting the appearance of the veneer. Therefore, to remind the owners of the construction sites on the construction site, we must pay special attention to the wood used for supervision can not be stored in the open, and after entering the construction site, do not place on the air outlet or heating. After completion of production, workers should be promptly reminded to seal oil as soon as possible in order to cut off the volatilization of water and play a role of protection. Listen to the sound and distinguish the porcelain bricks The owner must pay attention to the purchase of ceramic tiles. First of all, pay attention to the water content of the tiles. The smooth, delicate surface, shiny surface and soft back feel are suitable for water content. Second, pay attention to the difference between tile ceramics and porcelain. The fine structure and striking sound is crisp and pleasing. It is a porcelain brick with low water absorption, while the structure has many holes and the percussion sound is dull and turbid. It is a ceramic brick with high water absorption. Because the temperature difference between day and night in spring is large, the water absorption rate should be used. Small porcelain tiles. According to industry insiders, there are also conservation problems when the tiles are laid and finished. The smaller the bricks, the more attention should be paid to conservation. Maintenance is generally performed every Other day after paving. The method is very simple. Use a clean wet towel to gently rub the bricks to keep the bricks wet. This is due to the small brick seam itself contains a small amount of joints, maintenance is not in place or not timely, it is prone to the cracking of the floor tile grout, cracking off the walls of the grout section, and even pulverization. When the wall paint is applied, the primary moisture-proof primer cannot be saved. After brushing, pay attention to ventilation and strive for maximum drying. In addition, you can choose to paste the lining cloth in the wall base treatment to ensure that the wall will not crack. Latex paint is not easy to dry, it will mold and taste bad, which requires the open air conditioning after construction to dehumidify, completely remove the moisture in the air. kaiping aida sanitary ware technology co.,ltd , https://www.kpfaucets.com