The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.
Material characteristics
1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.
2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.
3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.
4. The lamp frame is made of high quality stainless steel.
5. Fasteners bolts and nuts are stainless steel.
6. Light source:400W-1000W sodium lamp.
Specifications:
Height: from 18m to 50 m
High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulighting.com
In an interview with the author, Shen Zhuangxing, secretary general of the Tool Tool Industry Association of China Machine Tool Industry Association, said that the production of cemented carbide tools is the development direction of China's future tool industry. The improvement of export tax rebate standards indicates the state's support for cemented carbide tool enterprises. .
According to reports, China's tool production mainly has two products, namely high-speed steel tools and carbide tools. Because the production of high-speed steel tools consumes a lot of resources, and the products are low-grade and low-priced, the industry does not encourage this. However, due to the demand of the domestic machinery manufacturing industry and the transformation of the domestic tool enterprise technology, most of the domestic tool companies still mainly produce such tools, and the export volume is also large. Last year, China's tool exports were 800 million US dollars, most of which were made of high-speed steel. The carbide tools were only tens of millions of yuan. At the same time, the export structure of this product is also a factor that causes friction in international trade. Although developed countries such as the United States and Germany have not yet responded significantly to China's knives, some countries in Spain and South America have had boycotts. Therefore, the China Machine Tool Industry Association Tool Branch has repeatedly called for the reduction of the export of high-speed steel tools. This time, the adjustment of the export tax rebate standard for cemented carbide tools is the best encouragement and support for this industry.
Xiamen Jinlu Special Alloy Co., Ltd. has formed a complete industrial chain from tungsten powder to cemented carbide tools, and has made tungsten deep processing products such as microcrystalline hard alloy rods and precision carbide tools as the main development direction. The company's tungsten deep processing plant in Tong'an District of Xiamen City is expected to be officially put into operation early next year. The initial annual sales scale can reach 200 million yuan, accounting for about 20% of the company's total sales. After the project is fully put into production, the sales income of new high-tech products can reach 1 billion yuan.
"In this year's several export tax rebate policy adjustments, the export tax rebate rate for cemented carbide tools and other products has increased from 5% to 11%. For enterprises, the significance is not only to increase profits, so simple." Xiamen Golden Heron Special Hong Chao, deputy general manager of the alloy company, said. He believes that this policy adjustment is mainly to give enterprises a confidence that the country is no longer calling for a stop in export, at least to release the attention and correct positioning of industrial exports, so confidence is the most important. "With the support of the state and the confidence of the company itself, I believe that Jinluo Tools will be more competitive in the international market in the future," he said. 
Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.
Shape: round, multi-pyramidal, column form, polygonal or conical
Material:
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
Tolerance of Dimension: ±2%
Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²
Light plate: Various figure of selection ,material with hot dip galvanization steel frame
Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut
Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode
Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles: Insert mode, inner flange mode, face to face joint mode .
Design of pole: Against earthquake of 8 grade
Wind Speed: 80 Km/Hour
Welding: We has past flaw testing. Internal and external double welding makes the welding in shape
Thickness: 6 mm to 20 mm
Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging
Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required
Among the new export tax rebate standards, there is only one type of commodity related to the machine tool industry, namely CNC machine tool carbide cutter. The specific name is a metalworking machine knife and blade (for metal processing) made of hard alloy, the product code is 8208101000, and the tax rebate rate is increased from 5% to 11%.