Tiles (including Floor tiles) are the most commonly used decoration materials for home and bathroom. Tiles often have problems such as looseness, falling, and water leakage during the application process, which brings too much depression to everyone. Stone adhesives and exterior wall waterproofing agents can be used to solve these problems. Anti-loose, drop Most of the tile pastes in front of the eyes use cement sand slurry as a binder. It has insufficient bonding fastness and is easy to form loose and falling tiles due to prolonged exposure to wet, leaking and immersed environments. The addition of 107 glue to the cement sand slurry can increase the bond strength, but the effect is not satisfactory. The resin type adhesive is used to stick the tile, and the bond strength can reach or exceed the strength of the porcelain, the floor tile and even the marble body, and it will never fall if it is soaked in water for a long time. Water leakage prevention Because the tile joints and the adhesive layer are extremely easy to leak, it will form the inner wall of the adjacent house to return to the tide, so that the paint layer will fall off or the wallpaper will be damaged. The mosaic tiles that are decorated on the outer wall can't withstand the long-lasting wind and rain, and the phenomenon of water leakage and back tide is more serious. It can be solved by using resin-shaped stone bonding and re-integration using exterior wall waterproofing agent. Old tiled tiles Old tiles should be refurbished. Generally, the tiles should be completely shoveled, and the labor intensity is too great. If you want to add new tiles to the old tiles, the cement sand slurry is very difficult. At this time, it is necessary to use a resin-type stone adhesive. It is not afraid of greasy and dirty materials on the tiles, and has good bonding strength. Tile maintenance Tiles are often stained with greasy, water embroidered, soapy scales, etc., especially in the gaps of the tiles. In order to maintain the porcelain surface without damaging the smooth surface of the porcelain surface, it is possible to use a multi-performance decontamination paste for cleaning. As for the tile joints, you should use a toothbrush and a little decontamination cream to remove dust, and then use a brush to brush a waterproofing agent at the seams, so that it can not only prevent water leakage and prevent mold growth.
Furniture Grade Plywood,Furniture Grade Melamine Plywood,Marine Grade Plywood
Plywood material can be used for different parts of a structure.
Plywood is a material manufactured by layers of wood veneer.
It may have from 9 to 11 different layers.
It has characteristics of crack,twist,warp,break and shrink resistance .
Plywood Wall Panel,Melamine Plywood,Marine Grade Plywood,Furniture Grade Plywood CHANGZHOU ART DECORATION MATERIALS CO.,LTD , https://www.cnartdecor.com