Polycrystalline Diamond Compact (PDC) drill bits are designed for efficient and effective drilling in various formations, from soft to hard rock. The surface of the cylindrical-shaped PDC cutters consists of premium synthetic diamond particles sintered together by high pressure and high temperature. These cutters have high hardness, wear resistance, and great tenacity, making them ideal for drilling in oil, gas, mining, and engineering fields. PDC coring bits are designed for use with high-powered drill rigs operating at relatively low rotation speeds. They offer several advantages over surface set bits, including faster penetration, longer drilling life, and better performance in hard rock formations. The Q series of PDC coring bits , including BQ, NQ, HQ, and PQ sizes, are widely used for soft to medium hard rock formations. The disc-shaped cutting element's surface consists of very fine synthetic diamond particles sintered together by high pressure and high temperature. A tungsten carbide stud is brazed directly into the bit matrix, allowing the cutters to withstand the large compressive and shear loads generated during drilling . PDC core bits are ideal for use with high-powered drill rigs operating at relatively low rotation speeds. They offer several advantages over surface set bits , including faster penetration, longer drilling life, and better performance in hard rock formations. Two main types of PDC cutters are available: conventional flat design or dome. The flat design is suitable for general drilling applications, while the dome design is ideal for drilling in hard rock formations. PDC drill bits are designed to provide efficient and effective drilling in various formations, with advantages including fast penetration, long drilling life, and high performance in hard rock formations. They are suitable for use in oil, gas, mining, and engineering fields and are available in various sizes and designs to suit different drilling needs. PDC Drill Bits Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com
In recent years, our factory has produced a large number of pumping unit reducers, and the working capacity of the boring machine is large. However, the moving mechanism of the column after the boring machine is a hand-rocking mechanism, which is extremely inflexible, and the processing is mostly a cantilever single-pole mast for boring, in view of the large width of the workpiece body. The mast can be long and the rigidity is seriously insufficient, resulting in extremely unstable product quality and low production efficiency. To this end, we will TX611C