Villa roof tile construction advantage villa roof tile construction method

Many of my friends now want to do the construction of the roof tile of this villa, but what preparations should be made before the roof tile construction of the villa? What are the advantages of our villa roof tile construction to meet the needs of friends? What is the method? What safety measures should be taken during the construction of the roof tile of the villa, and what are the precautions during the construction of the roof tile of the villa.

First, the roof tile construction advantages of the villa

1. The natural silica sand particles are formed by high temperature and high pressure, the color is natural and durable, and the stability is good.

2. Applicable to more severe climatic conditions.

3, the lock between the tiles, the utilization rate is high, there is no possibility of slipping.

4. The water rate is only 0.43%, and the waterproof performance is good.

5, the texture of natural slate, axe wood board, clear and realistic.

6. Compared with slate: high utilization rate, no radiation, not easy to break, clear texture and convenient construction.

7, compared with the board: fire, not mildew, no moisture, no cracking, no insects, hard and durable.

Second, villa roof tile construction method

1. Sloping roof of Dapo roof: screed construction → waterproof layer construction → insulation layer construction → protective layer construction → Xiwa paving → lightning protection belt installation, the construction process of the slant roof of the minaret roof is the same as the slope roof.

2. Large-scale roof inclined roof construction 5.1.1 Leveling screed is 20mm thick 1:3 cement mortar leveling layer. Before screeding, first clean the dust, mortar and other debris on the surface of the base.

3, the roof elevation is numerous, the yin and yang ridge lines are staggered, and there are more members on the roof.

4, the leveling layer should be yin and yang ridge line, tube root, smoke duct, chimney, tiger window, gutter, and other yin and yang corners with cement mortar smeared into a radius of not less than 60mm arc or obtuse angle, so that the waterproof roll is smooth .

Third, the villa roof tile construction considerations

1. Move the tiles from the ground to the roof, and handle them gently to avoid breakage.

2. Laying of ridge tiles: The ridge tiles should be laid in the direction of the maximum frequency of the wind (from east to west, from south to north) to ensure that the tiles will not be picked up by the wind when encountering strong winds. In order to ensure that the roof (including the sloping ridge) is straight, the ridge tiles should be laid on the line, and when the lightning protection belt is extended at the ridge, the gap between the cutting holes on the ridge tile is sealed with silicone.

3, jointing: pure cement slurry and glue with water and then brushed in the exposed siting, pay attention to not brush on the surface of the main tile, ridge tile.

4, Wazi Ping mouth, to ensure that the mouth is straight and tidy.

Fourth, villa roof tile construction safety measures

1. Entering the construction site must wear helmets, wear non-slip shoes, fasten seat belts, and do not wear wet shoes on the roof; do not chase and play at the construction site, and do not enter the construction work after drinking.

2, mortar and tile should be placed in special equipment, not directly placed on the roof panel, mortar should be used with the mix, the mortar should be used up within 2 hours, it is strictly prohibited to use overnight mortar; can not be used hopper, material Place the pot on the sloping roof overnight.

3. When the construction is completed, the required materials and tools should be collected to prevent falling objects. If it is necessary to cross-construct construction, notify the on-site supervisor that the coordination must be staggered.

4. It is forbidden to work in the weather with wind exceeding level 5 and above, and it is forbidden to operate in thunderstorm weather.

5. The materials to be transported must be placed in a stable place to prevent the person from slipping and slipping.

6. When constructing on the edge, there must be a safety railing and a steel mesh on the work surface.

After learning from the contents of the article, we know that our villa roof tile construction still has many advantages and benefits, and Xiaobian also introduces some of the villa roof tile construction method steps, which are simple and clear, we can refer to the next, we There are some safety measures and precautions for this villa roof tile construction. Everyone should remember that there is any decoration information that you want to know in the future. You can pay attention to our decoration home network.