What are the precautions for installing the basin sink?

The sink is one of the essential products of our kitchen and bathroom. There are two kinds of kitchen sinks on the market, namely the above-ground basin and the under-basin basin. We can choose according to their own preferences, Xiao Bian is now on the introduction of the method of installation of the basin under the sink and the sink basin sink What are the precautions?

Undermount basin sink installation method

There are many different materials in the sink's countertop. Some people like quartz stone, and some people like artificial marble. Then Xiaobian uses quartz stone countertop materials to explain.

1, under counter basin is generally more heavy, so the best in the installation under the counter basin below the bracket, the bracket should be customized according to the size of the basin under the table.

2, the under-basin bracket is installed to fix the bracket and the wall, to determine the location of the installation of the basin. The vertical distance between the sub-basin basin and the countertop was measured according to the size of the sub-basin basin. The data obtained was the lowest point of the support in the horizontal direction of the wall.

3. After obtaining the data, the worker will grind the hole with the grinder according to the size of the under-basin basin. When polishing, it is necessary to pay attention that no damage will occur, otherwise the appearance will be affected.

4, to find a piece of stone material with the same surface material made under the splint, according to the first step method of drilling. The lower splint is to cover the sink from the bottom up, the holes must be smaller than the countertops, and the surface of the sandwich plate should be clean.

5. When the under counter basin and the countertop are glued, use a stone plate to cover the sink, buckle the under counter basin under the countertop and in the middle of the bracket, and then glue them with marble adhesive. This step is very important. Be careful. Whether it is easy to fall off the table basin.

What are the precautions

1. After the under-basin sink is installed, the water in the water tank should be filled up to do the drainage test. The drainage of the drain and overflow holes should also be tested. When seepage occurs during drainage, it must be reworked immediately. Make sure the bowl is sealed after the above conditions have not occurred. When the table top and the sink edge are sealed, it is necessary to ensure that the gap at the joint is even and no water seepage can occur.

2. The kitchen sewage contains many bacteria and dirt that affect our health. In order to be able to suppress the hidden bacteria, we can use the sink system material to add sinks of green material. Some grit slag layer separation effect is good, can control the residue clogging the sewer, can make the drainage more smooth.

Xiao Bian summary: The above content is about the basin sink installation methods and precautions related to what are the relevant content, we must pay attention to the installation of the above precautions to avoid unnecessary trouble. If you want to pay more attention to relevant knowledge, you can pay attention to this site information.

Under counter basin sink