What do you need to know before installing the switch socket?

First, planning priorities: consider the three major aspects

Home switch socket planning, that is to determine the number of installation and installation location, can be integrated into three aspects to consider. The first is to consider the function of each space of the house, determine the function of each space, such as bedroom, study, living room, audio and video room, etc. Secondly, consider the main electrical appliances, furniture placement and approximate size, such as cabinets, TVs, refrigerators, washing machines, etc. Again, it is to consider the family's lifestyle and needs, such as the installation of a smart toilet, the toilet position must be set to switch socket.

Second, plan the number of switch sockets

The number of appliances in each home is different, and the number of natural switch outlets is not likely to be the same. To determine the number of switch sockets needed at home, it can be determined by considering the three major factors mentioned above. Specifically, you can list all the appliances that will be used in each space, and then determine the number of switch outlets.

Third, planning switch socket installation position

After determining the number of switch sockets, it is to determine the installation position. The position of the switch socket usually needs to consider the placement and size of appliances and furniture, and the family's lifestyle. The position of the switch socket has certain rules to follow, but it still needs to be determined by specific conditions.

1, switch position planning

The position of the switch is generally easier to determine. The switch of the luminaire is generally between 1.2m and 1.4m above the ground (as high as an adult's shoulder) and is installed at the same height, with a difference of no more than 5mm; the position of the switch also needs to take into account the family's lifestyle. If most people are right-handed, they generally open the door to the right, and the switches are installed on the left side of the doorway, which means that the door can be easily reached by a switch.

2, socket location planning

The determination of the installation position of the socket is relatively more complicated than the switch. The placement and size of electrical appliances and furniture have a great influence on the installation position of the socket.

When considering the installation of switches and sockets, the better the consideration, the better, because if the planning and installation is reasonable, it will bring great convenience to the future life. In addition to considering the quantity and location, it is best to consider the following points.

1, part of the position to consider the installation of dual control switch

For the upper and lower floors of the stairs, there are two bedroom doors and a bedside. On both sides of the larger living room, the use of dual control switches is very convenient for life. For example, the switch is set at the entrance of the bedroom and the bedside respectively, and the indoor lighting can be easily controlled when entering the door and sleeping.

2, some electrical outlets consider switching

Almost all home appliances have standby power consumption, and some outlets with switches can be used, so that it is not necessary to pull the plug and can cut off the power supply, so that the unplugged wires do not affect the appearance. For example, consider using switch sockets at the kitchen countertop to avoid frequent plugging and unplugging of electric appliances such as rice cookers and electric kettles.

3, some areas switch socket attention with splash cover

Switches and sockets generally do not install too close to water. If installed in an open balcony, close to the sink, bathroom wet area, etc., remember to use a special splash cover switch socket.

4, take appropriate long-term consideration of long-term needs

When determining the number and location of switch sockets, it should be appropriate to advance and consider the long-term needs. If the shoe cabinet may need to be installed afterwards, the toilet may be replaced with a smart toilet. Therefore, as far as possible in consideration of the current and near future all need to use switch sockets, you can set up a spare socket. In addition, if you are going to have children, the outlets in your home are best equipped with protective devices.

Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).

Switch socket switch socket installation