Normally open air valves are a type of Solenoid Valve that is designed to remain open in its default state, allowing air or gas to flow through the valve at all times. These mini air valves are commonly used in a variety of applications where a constant flow of air or gas is required, such as in pneumatic systems and gas pipelines. Normally Open Air Valve,Micro Solenoid Air Valve,Blood Pressure Monitor Air Valve,Dc Micro Air Valve Shenzhen DYX Technology Co.,Limited , https://www.dyxpump.com
The primary function of a normally open air valve is to provide a continuous flow of air or gas through a system, which can help to maintain consistent pressure levels and prevent the buildup of excess pressure or vacuum. These valves are typically operated by a solenoid or other type of electrical control, which can be used to open or close the valve as needed.
There are several different types of normally open air valves available, each of which is designed to meet specific application requirements. Overall, normally open air valves are an essential component in many industrial and commercial systems, providing a reliable and efficient means of controlling the flow of air or gas through a system.
2CY, KCB gear pump profile 1, 2 CY, KCB gear pump for conveying a variety of lubricated liquids, the temperature is not higher than 80 ℃, high temperature 100 ℃, with the unit can be equipped with high temperature resistant materials , Viscosity of 5 × 10-5 ~ 1.5 × 10-3m2 / s. 2,2CY, KCB gear pump is not suitable for conveying corrosive, hard particles or fibers, highly volatile or low flash point liquid, such as gasoline, stupid and so on. 2CY, KCB gear pump equipped with a pair of rotary gear in the pump body, relying on the two gears intermeshing, the pump working chamber divided into two independent parts. When the pump is running, the driving gear drives the driven gear to rotate. When the gear disengages, a partial vacuum is formed on the suction side, and the liquid is inhaled. The sucked liquid fills each tooth valley of the gear to the discharge side and the liquid is forced out of the pump when the gear enters into engagement.