Surgical Head Cap,Medical Scrub Caps,Surgical Hood Cap,Surgical Caps Online Ningbo Autrends Prevention Products Co., Ltd , https://www.autrendsafety.com
1, pay attention to the use of the environment: the temperature of the room laying anti-static floor should be controlled at 15 degrees -35 degrees, humidity controlled at 45% -75% RH;
2, routine maintenance details:
(1) It is forbidden to use sharp instruments directly on the surface of the anti-static floor to prevent damage to the surface's anti-static properties and aesthetics;
(2) It is forbidden for personnel to jump directly to the floor from a height, and it is forbidden to perform brute operations on the floor and damage the floor.
(3) When moving the equipment on the floor, it is forbidden to push the equipment directly on the floor to prevent scratching the floor. The correct method is to lift the equipment for transportation;
(4) Do not place the heavy equipment in the equipment room directly on the anti-static floor. This may cause the floor to be deformed due to long-term load. The correct method is to place the heavy equipment on the ground floor. (5) Do not use sharps. When installing anti-static flooring, it is necessary to use a suction plate to operate when disassembly is required.
(6) During the maintenance of the anti-static floor, use a vacuum cleaner or a mop to clean the board surface. Do not spray the liquid on the floor surface. (7) Anti-static wax can be applied to the floor surface to lift the floor. Maintenance, which can ensure the long-term use of the floor effect (8) You can use gasoline, detergent, detergent to clean the dirt on the surface of the anti-static floor, and then antistatic wax on the floor surface to perform (9) periodical defense The static floor is waxed and polished for maintenance. The cycle time is generally one year. It is required to perform this operation after cleaning the floor.
The daily maintenance work of anti-static floor is usually focused on the maintenance of anti-static floor not only can improve its function, but also can extend the life of anti-static floor. The current common maintenance methods are the following: