Behind the stone's weight, there are so many tricks hidden behind it.

The work of stone material inspection is trivial and meticulous, and an inadvertent loss will cause no small loss. Therefore, we must pay attention to it everywhere.

For example, the fact that stone is overweight is far from being as simple as you think!

Empty car overweight! Do you know the following pounding means? 1. Fill the empty car first, then put the water after loading; put the oversized water tank on the truck. Let go and reload the pound.

2. Install hydraulic pump and dummy shaft;

3, jump scales;

4. Take S, also known as the turning scale, and take the “S” road to bypass the probe of the underground scale to reduce the weight.

5. Stop when you are about to pass the underground scales, then slam on the throttle and rush over the scales to make the front of the car lift to reduce weight;

6. Slowly let the front wheel part pass the scale, then reverse the vehicle, and then pass the pound once, increasing the identification of the axle number of the truck;

How to avoid the above problems? The weight of the side door is really too much, you can't think of it, you can't do it... So, how to avoid the above problems to the greatest extent?

1, the ratio of a number of logistics companies, choose the cheapest and most reliable, the first time and the customer to confirm whether the price is acceptable;

2. As soon as possible, the driver agrees that the driver will over-the-counter in the reliable platform company and check whether the truck is full of water; (sometimes waiting for the car to take a long time)

3, tracking the empty car to the factory loading, in order to prevent drivers from cheating;

4. Before loading the car, check the quality of the stone again to ensure that it meets the customer's requirements;

5. After loading the vehicle, check whether the quantity of stone is correct and whether there is damage.

6, with a heavy truck overweight, observe the driver's way of weighing, to prevent greasy;

7. Timely feedback of the situation of the pound to the customer;

Buffer Rings

Buffer ring is a common Machine element, which is used to reduce the vibration and noise generated during the operation of the machine. Buffer rings are mainly divided into two types: rubber buffer rings and spring buffer rings. Rubber buffer rings are suitable for low-frequency vibration and impact, while spring buffer rings are suitable for high-frequency vibration and impact. Buffer ring is an important Machine element, which is widely used in automobile, machinery, electronics and other fields.

Buffer Seals,Rod Buffer Seal,Seal Buffer,Buffer Seal Hydraulic

DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com