Soap Dispenser
Kitchen and Bathroom Accessories include sink strainer, colanders, cutting boards, soap dispenser and more. Kitchen and bathroom accessories are made from the finest materials and work with our sinks and most other kitchen and laundry sinks. You can mix and match them freely to turn your sink into a multifunctional sink with more convenience.
soap dispenser can make your cleaning becoming more convenient.
Soap Dispenser,Foaming Soap Dispenser,Hand Wash Dispenser,Kitchen Soap Dispenser Jiangmen MEIAO Kitchen And Bathroom Co., Ltd. , https://www.meiaosink.com
Small pump-type food-grade food can be transported at temperatures not higher than 90 ℃ (direct connection) or no higher than 105 ℃ (with bearing bracket), with or without soft fine particles or Fibrous, corrosive or hygienic liquid required. Now Xiaobian to introduce the food grade small self-priming pump material and installation methods. Small self-priming pump First, the food-grade small self-priming pump Material Description 1 over-current parts and connectors: 1Cr18Ni9TI stainless steel. 2. Mechanical Seal: Static Ring: Ceramic (SiC). Moving ring: graphite impregnated furan resin. 3. Rubber structure: Viton. 1Cr18Ni9Ti stainless steel. 4. If the transmission medium or conditions of use does not match with the pump configuration, other materials can be configured separately. If the flow of parts with 316 stainless steel, shaft seals can be equipped with PTFE or other types of static and dynamic ring. Second, the food-grade small self-priming pump installation instructions 1. Pump device delivery pipe joints, especially the input pipe joints must be connected and reliable, well-sealed. 2.SFB-type pump installed higher than the suction surface, the suction inlet pipe should be installed at the end of the valve, SFBX self-priming pump in the suction range of the suction tube need not install the bottom valve. 3. The transport of liquid such as mixed with bamboo, wood, stone, metal, etc. is too large or too large volume of hard objects, inhalation pipe inlet must be installed on the filter, so as to avoid the above objects were sucked into the pump card stuck impeller Damage to the motor or pump parts. 4. Pumping devices should generally overload and short-circuit protection devices, such as fuses and over-current relays, and should be based on the current motor signs to adjust the settings of the protection device. Note: 1.SFB pump installation height 10.09- (NPSH) r-0.5-hw, hw for the suction pipe water resistance. 2.SFBX pump installation height ≈ allow suction vacuum height-hw. 3.25SFBX-8 type, 25SFBX-8D type pump, the self-priming height of 3 meters, the self-absorption time ≦ 3 minutes. The rest of the model pump self-priming height of 4 meters, self-priming time ≦ 3 minutes. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)