Home interior decoration "switch socket" installation skills

The switch socket is related to the life in the future, must consider carefully, the switch socket in different places has the high bottom, how to install is safe and convenient? Then look at Xiaobian teach you how to install the switch socket.

Home renovation switch socket installation is essential, it is related to the use of current, it is like opening and closing the same link, before installing the switch socket must first understand the installation knowledge.

Daikin Air Conditioning    Universal switch

1, material requirements

(1) Each type of switch: The specification and model must meet the design requirements and have product certification.

(2) All types of sockets, specifications and models must meet the design requirements and have product certification.

(3) Plastic (Taiwan) board: It should have sufficient strength. Plastic (table) plate should be flat, no warping deformation and other phenomena, and product certification.

(4) Wooden (Taiwan) Board: Its thickness shall meet the requirements of design requirements and construction acceptance standards. The plate surface should be flat, no cracking and warping deformation phenomenon, the paint layer intact without falling off.

(5) other materials: metal expansion bolts, plastic expansion tubes, galvanized wood screws, galvanized machine screws, wooden bricks and so on.

2, the main equipment:

(1) Red pencil, tape measure, level ruler, pendant, insulated gloves, tool bag, high stool, etc.

(2) Hand hammers, tweezers, wire strippers, needle nose pliers, tie cones, taps, casings, electric drills, electric hammers, drill bits, nail guns, etc.

3, operating conditions:

(1) Various pipes and boxes have been laid. The box closes.

(2) The wire of the line has been worn out and the insulation has been shaken.

(3) The interior decoration works of the wall pulping, paint and wallpaper have been completed.

At present, there are two kinds of switches that are mainly sold: single-pole switches and two-way switches. A unipolar is an ordinary switch, a switch closing point, a closing point contact, a circuit connection, and a disconnect circuit. There are two closed points in the double path, and the switch makes an alternative contact between the two lines. Dual switch is mainly used for dual control purposes. For example, one in the hall door and one outside the bedroom door can be used to control the main lights in the hall. This also answers your other question. Dual-control does not use single-pole switches, but uses two-way ones.

Next is the switch socket installation skills

1, switch sockets can not be installed in the tile and waistline of the tile.

2, switch socket bottom box in the tile hole, the border can not be more than 2mm above the bottom box, can not be opened into a round hole. In order to ensure the installation of switches and sockets at a later date, the bottom edge of the box should be flush with the tiles as far as possible so that no longer a longer screw can be found during installation.

3, installed switch socket location can not have more than two tiles were destroyed, and try to make it installed in the middle of the tile.

4. The opening of the mounting faucet must be made into a round hole, it cannot be opened into a square hole, and it cannot be opened into a "U" type, and then a piece is added in the "U" type hole. The size of the opening cannot exceed 2mm of the pipe diameter. Above, and the outlet must also be flush with the tile.

5. When the socket is installed, the wall-mounted socket should not be less than 1.8 meters from the ground.

6. The concealed socket shall not be less than 0.3 meters above the ground. To prevent children from getting an electric shock, touching with a finger, or inserting a metal object into the power hole, be sure to use a safety socket with a safety cover.

7. The construction wiring requirements for single-phase two-eye sockets are as follows: when the holes are horizontally arranged, they are “zero-left-right-fire”, and when the holes are arranged vertically, they are “zero under fire”.

8. The wiring requirements for single-phase three-eye sockets are: the top grounding eye must be firmly connected with the grounding wire, solid, and connected, and must not be disconnected. The remaining two holes are connected according to the rules of “left zero right fire”. It is worth noting that the neutral line and the protective grounding line must not be miswired or integrated.

9. The refrigerator should use an independent, protective grounded three-eye socket. It is strictly forbidden to connect the grounding line to the gas pipeline to avoid serious fire accidents; in order to ensure the absolute safety of the family, the outlet of the range hood must also use the three-eye socket, and the protection of the grounding hole must not be taken lightly.

10, the bathroom is often used to take a shower shower, easy to wet, should not install ordinary type socket, should use waterproof switch to ensure personal safety.

11. When installing the switch, the concealed switch requires 1.2 meters to 1.4 meters from the ground and a horizontal distance of 150 mm to 200 mm from the door frame.

--position:

The general switch is to open and close with one hand in the opposite direction, and the left hand is left with the right hand. Therefore, most home switches are mostly mounted on the left side of the door so that they can be opened with the right hand after entering the door. Compliance with the logic of behavior.

Switch socket installation order

1. Find the specific location of the switch socket on the drawing first. It looks a bit like the English “F” on the floor plan.

2. Draw a rough outline of the socket box box that has been prepared beforehand. This tool is very helpful for the positioning.

3. Measure the distance from the wall of the wire pipe in the vertical direction.

4. Measure the same width at the corner.

5. According to the position of the point just measured, you can draw two vertical lines with bullets.

6. The cutting machine cuts along the bullet line.

7. When the electric drill comes out and opens a suitable pipe trough, the depth of the trough must match the diameter of the pipe, and the pipe can enter the seat, and whether the opening is neat can reflect the level and experience of a construction team.

8. Open a box hole and insert a connector outward from the box.

9, made a line box, will be embedded in a good wall.

10. Calculate the distance between the tube and the floor from the box to ensure that the bend is smooth and the tube does not break.

11. Connect the pipe and the box, and place the bend on the ground smoothly.

12, the new pipe threading can not go to the wire, but if you wear expensive audio cable or long-distance stringing more standard practice will use the wire.

13. First, make a hook on the wire to prevent the tip from scratching the inside of the pipe.

14. Slowly insert the wire into the pipe and slowly push it, avoiding excessive scratches inside the pipe.

15. After the wire comes out from the other end, it is screwed with the wire and slowly pulls the wire into the tube. The wire is actually the lead in this process.

16, after the wire to the box, the pipe connecting with the matching joints.

17. As a hidden project, the interface link must be closed and not damaged.

18. The other end of the wire should be protected with a pressure cap in time.

19, the line of the first part of the standard practice is to hide all the boxes, but the length control of the thread is a detailed problem, no more than a lot of standard.

20. After the threading part is completed, it can be filled with cement evenly after a series of acceptance tests such as whether the circuit is smooth or not.

21. The process of threading on the ceiling is basically the same, but generally the red line and the blue zero line are used because the ceiling is mostly a lamp line.

Switch and socket selection notice tile switch socket paint decoration design home decoration bedroom door bathroom tile bathroom door bathroom ceiling material bathroom ceiling bathroom design bathroom waterproof bedroom ld tile bedroom door to bedroom door tile specification bedroom lamp