LEDER technology`s street light is built and integrated with World's 1st AI as a software based version for a wide range of commercial, industrial and residential lighting applications. This high quality and very durable light is completely self-contained.This LED street light provides users one step Power-ON for Dusk to Dawn or Dark Sky City illumination all night long.
Build-in light-sensor, this solar gutter LED street lights with clips can auto on at night and off during the day. Waterproof rating and durable construction resistant for all kinds of weather, there is no worry about being damaged by the rain or snow. To be fully charged in only 6-7 hours, providing a long working time about 12-18 hours in bright mode. Easy to install.
Features:
• Artificial Intelligence
• Outdoor use
• Group and control multiple lights with the smart life app
• Energy saving save electricity
• Environmental Care
• Color temperature :3000k-6000K
• Safe and beautiful
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
This LED street light is perfect for outdoor use, such as a walkway, fence, garden, path, patio, gutter, and so on. Replace your old outdoor parking lot lights with a high efficiency LED street light. Save money and replace bulbs less often with a 50,000 hour rated LED. The fixture is also ideal for new installations. Light up an area of your parking lot, walkways, and sports court for safety and aesthetics.
We have rich production experience in lighting. Except LED Street Light, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED Inground Light, LED Spike Light ,LED Bollard Light ,LED Wall Washer,Outdoor Wall Light & step light as so on .
Solar Street Light,Solar Street Lamp,Solar LED Street Light,Solar Powered Street Lights LEDER LIGHTING CO.,LTD , https://www.lederlight.com
The reason that hot oil pump produces motor bearing rust is very complicated, it may be that the bearing is rust-proofed badly, it may also be caused by moisture and corrosion caused by paint mist. It is with the type of insulating paint, pre-filled bearing grease, motor paint handling and motor storage environment has a close relationship. Corrosion of the motor bearings by testing the sample to determine the corrosion of motor bearings is determined by the motor stator winding insulation paint volatile acid composition and the grease is absorbed by the grease, resulting in the deterioration of grease failure Caused, especially in the ball and the raceway contact location, the corrosion is more serious. Most motor plants used in insulating paint volatile acid components are mainly four: â‘ unresponsive low-molecular-weight paint raw material acid components (anhydrous isosorbide and terephthalic acid, anhydrous maleic acid, trans Butenedioic acid). â‘¡ acid curing acid generated when the composition (with phenolic denatured paint, from formaldehyde to formic acid). â‘¢ heat or oxidative decomposition of lower fatty acids (formic acid, acetic acid). â‘£ paint cured acid generated after the decomposition of water. Insulating paint is the main acid component of formic acid, the amount of formic acid is closely related to the occurrence of rust. Grease adsorption of volatile paint out of the acidic components, causing grease deterioration, and this acidic component and promote the hydrolysis of oil, resulting in the concentration of acidic components increased, causing bearing corrosion. Grease working principle is the use of grease layer will be separated from the ball and the inner and outer raceway, the viscosity of the use of oil viscosity characteristics, attached to the ball and raceway surface, separated from the ball and the inner raceway metal interface to reduce the metal surface Wear and protect the metal from the air and water corrosion, reduce vibration and noise, so that the bearings can be smooth rotation. However, the deterioration of the grease, the viscosity will change, the oil film break through, the grease separation function and adhesion characteristics will disappear, the consequences of this, first, make the insulating paint acidic components directly oxidized metal surface, causing bearing corrosion. Second, the ball is caused by direct contact with the inner and outer raceway, wear occurs when rotating, resulting in increased noise.