How to analyze the leak of the floating window

Nowadays, many people will choose to design a bay window in their homes because it can bring good lighting and aesthetics to their homes. However, there are always unsatisfactory places. I believe that many people have seen the phenomenon of water seeping through the window. Many people can only do nothing about this situation. They do not know it is necessary to take urgent measures. The method and reason why the floating window is leaked today will give you analytical analysis.

1、Why is the cause of window leaking?

Before answering the floating window waterproof trapping method, it is necessary to find out where the cause of the floating window is. Here are the specific possibilities:

a, Bay window waterproof design is not fully considered

When designing a bay window, you should consider it comprehensively. You must not be sloppy when it comes to waterproofing. Do not only consider the design of the bay window, and some one-sided waterproofing. Ignore the waterproof treatment of the material joints. Now outside the bay window, The three-dimensional decoration of the wall is much richer than before, and the lines are also a lot more. The temperature expansion of various materials is different, and if water is not taken into consideration, cracks will appear in the interface and water leakage will occur. .

b. The lack of construction details

The bay window did not mix with other outside wall concrete in the concrete, but began to build after the completion of the exterior wall project. In this way, some places did not do a good job, and the details were not handled properly. There are some problems with the pipeline that make the gap between the concrete and the partition invisible. Although the root of the problem lies in the external wall, as long as it is raining, seepage can also occur.

2、What are the methods of waterproofing the window

a. In case of water leakage, some aging or shelling materials should be removed first, and the sealed area should be cleaned. It must be cleaned to the surface with no dust or impurities.

b. Use a sealant with a certain proportion of waterproof powder to adjust it to a very viscous sealant. In this case, the joint between glass and aluminum alloy can be sufficiently tight, and other places need to be tight. Use specialized glass structural adhesives to repair areas that are not tight enough, and to keep them flat and smooth when working.

Xiao Bian concludes: The above is about the floating window waterproof trapping methods and the reasons are reflected in what aspects of the introduction, I believe we have a deeper understanding of this knowledge, right, in the face of this situation in the future should know what to do Measured. If you are still uncertain, it is recommended that you or professionals to deal with, so as not to affect the normal life.