How to make a beautiful sewing agent? Introduction to the steps of making a beautiful grout

Generally, during the decoration process, everyone will notice that if you don’t add something between the two tiles, you will feel particularly ugly. At this time, you need a beautiful sewing agent. The decoration effect of the beautiful sewing agent is really unquestionable. The two tiles are naturally united in one piece. How should the beauty agent be used? This is also a small study, then let Xiaobian introduce it to everyone!

First, how to make a beautiful sewing agent? ——Steps of making a beautiful grout

1, tools: glass glue gun, textured paper.

2. Use an awl to pry the mouth of the beautiful sewing agent into the glass glue gun, then put a white discharge nozzle, cut the discharge nozzle into a 45 degree slope with a knife, and keep the width of the discharge nozzle and the width of the slit. Basically consistent, it is advisable to leave the nozzle completely in the seam, leaving a gap of 2 mm deep. Before the construction of the beautiful grout, use a rag or a fine brush to clean the magazines such as dust inside the seam.

3. Stick the textured paper on both sides of the seam. The textured paper should be about 0.5mm from the edge of the slit.

4. Put DuPont crystal clearing agent on the glue gun, and evenly drive along the brick joint. The construction is about 1 meter, and evenly spread with fingers or small scrapers; when the beautiful sewing agent is not solidified (construction 1 Around the meter), remove the textured paper.

Note: Be sure to tear off the textured paper in time after smoothing. It is easy to pull up the beautiful seaming agent in the seam after a long time. Check once after the construction is completed. If there is unevenness in the area, make up again.

Second, how to make a beautiful sewing agent? ——Selection of beauty grout

1. See if the mark on the package is complete and whether there is a security code.

SGS is currently the environmental protection standard for the beauty industry. It is not only qualified for quality, but also meets specific environmental protection requirements during production, use and handling. Compared with similar products, it has environmental protection, safety and resource conservation. Environmental advantage.

2. Look at the hiding power of the beautiful sewing agent after solidification.

After drying, the shrinkage is too obvious, the surface should be full and flat, and if it is a product with insufficient consistency, it will collapse and fall off.

3. Look at the hardness and toughness of the beautiful grout after construction.

The hardness of a good beauty agent can be basically comparable to that of a ceramic tile. The strong toughness allows it to automatically adapt to the tile, without worrying about the cracking of the tile after a long time of use. Inferior products are not high-grade raw materials, and their contents tend to harden after being exposed to air, and they are easily cracked after being left for a while.

4. Look at the consistency of the beauty grout.

The consistency is suitable and it is not easy to be rubbed off, indicating that the construction performance is good. Good beauty grouts are strictly in line with the national quality standards, the consistency is appropriate, the bonding ability is outstanding, and there will be no voids and shedding after construction.

The above content is all the knowledge of how to use the beautiful sizing agent. If you want to do your own hands, you should take a good look at the content that Xiaobian is sharing for you today. Okay, today’s content is over here, I want to To learn more about decoration, please pay attention to the decoration home network!

More related wonderful reading:

Is the beauty agent poisonous? What are the advantages of beauty grouts?

How to build a beautiful sewing agent? Beautiful sewing agent construction steps and precautions

How is the floor tile beautiful? What are the characteristics of floor tiles?

How to use ceramic tile grout? US grout use precautions

Technical information
Heating Material: Carbon crystal
Power: 250W/350W/550W/750W/950W
Voltage: 115V- 220V
Certification: ETL, CE, ROHS, ISO9001, SAA
Frame material: Aluminum frame
Using life: 100, 000 hours
Infrared radiant wavelength: 8~14um
Electric heat radiation conversion rate: >99%F
Surface temperature: 70 - 80 celsius
Installation type: Wall or ceiling mounted
Color: White and colorful (with attractive picture)
Function: Adjustable Thermostat, Overheat Protection