LEDER technology`s outdoor wall light brings about an air of luxurious sophistication with a minimalist top handle, and clear glass shades, with enough durability to withstand harsh weather conditions with its cast aluminum frame.
Light up your outdoor space in contemporary style with this two-light sconce. Designed to mount directly to the wall, it's crafted from metal and features a sleek, rectangular body suited for modern ensembles. It requires a fluorescent bulb, so you can light up the porch or patio right away. This must-have luminary, so it won't take up too much space.The outdoor wall light with its classic black finish the wall sconce complements any decor making it the ideal piece for all your Outdoor Lighting needs
Features:
• Power Source: Hardwired
• Dry, Damp or Wet Location Listed: Wet
• Easy to install
• Color temperature: 3000K
• IP65
• Fixture Material: Metal
• For Eco-friendly lighting design, convert to LED bulbs to offer savings and reduce energy
• Thin side profile
• Warranty:3 - 5 years
Mount these outdoor wall lights on your porch, entryway, or garage and experience this stylish look for yourself.Utility and style come together in the LEDER technology.
We have rich production experience in lighting .Except Outdoor Wall Light , we also offered other product in outdoor lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light ,LED Bollard Light & Step Light as so on .
Outdoor Sconces,LED Wall Pack,Solar Wall Lights,Exterior Wall Lights JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.ledpolelights.com
The reinforced floor joint has two profiles: flat mouth and lock. Most of them now use a lock silhouette. The lock profile has different structural types. Different tool configurations are required depending on the lock structure and processing equipment. Nowadays, the tool configuration scheme is adopted: pre-cutting a chamfer and finishing a lock.
The anti-scratch and anti-wear of the reinforced floor surface is achieved by the aluminum oxide uniformly distributed in the wear-resistant paper. The hardness of aluminum oxide is second only to cubic boron nitride (CBN) and diamond (PCD), and can only be processed with diamond tools. The wear layer is about 0.15 ram thick, which causes the tool edge to wear quickly.
When designing the tool, it is necessary to consider the tool cost of the unit m floor. Therefore, tools such as pre-cutting tools, chamfering tools and finishing knives for processing the wear-resistant layer should have multiple cutting points in addition to a reasonable angle. In addition, the reinforced floor diamond tool should also meet the following points:
1) The center hole has high matching precision, and the cutter teeth have small radial and end jumps;
2) The imbalance during operation is low;
3) The diamond layer and the cemented carbide (matrix) have sufficient bonding strength and sufficient strength and toughness;
4) has sufficient durability;
5) The joint between the hoe and the gutter is adjustable, and the adjustment precision is high;
6) The cutter structure is reasonable and easy to remove dust and dust.
In the process of strengthening wood flooring production, there are two processes for cutting: one is the large plate, and the other is the processing. The easiest way to slab slabs is to use a table saw, but with low efficiency and accuracy. At present, the main use of multi-saw saw production line: vacuum suction cup large plate automatic feeding a vertical fixed width segment a lateral steering transport a horizontal fixed length cut off a discharge conveying a vacuum suction cup automatic stacking. The equipment for the processing of the tongue-and-groove has the production line of longitudinal four-side planer + horizontal double-end milling and the production line of longitudinal double-end milling + horizontal double-end milling. At present, the latter is used, namely: vacuum chuck automatic feeding, longitudinal double-end milling, one steering Conveying a horizontal double-end milling and discharging a vacuum suction cup automatic stacking or automatic packaging line.