Meet your needs for wood

Plates can be divided into two categories according to material classification: solid wood panels, wood-based panels; according to the molding classification can be divided into solid panels, plywood, fiberboard, decorative panels, fire board, particleboard, and so on. The process is similar and there is not much difference because the solid wood panel belongs to the plate and is a branch of the plate. Here we will make a detailed introduction to solid wood panels.

Solid wood plate appearance, use characteristics

Solid wood refers to the use of natural wood as a whole and does not contain glue. The preferred material for environmental protection is not a single kind of wood.

The sheet products have a flat shape, a large ratio of thickness to thickness, and a large surface area per unit volume. This shape feature brings about its use characteristics:

1. It has a large surface area, so it has a strong ability to contain and cover. It has been widely used in chemical industry, containers, construction, metal products, and metal structures.

2. It can be arbitrarily cut, bent, stamped, welded, made of various product components, flexible and convenient to use, in the automotive, aviation, shipbuilding and tractor manufacturing and other departments occupy an extremely important position;

3. Can be bent, welded into various types of complex sections of steel, steel, large I-beam, channel steel and other structural parts, it is called "universal steel."

Production features

1. The plate is rolled out with a flat roll, so changing the product specification is simple and easy, the adjustment operation is convenient, and it is easy to realize full computer control and automatic production;

2. The shape of the plate is simple, it can be produced in rolls, and it is the largest in the national economy, so it must be able to achieve high-speed continuous rolling production.

3. Due to the large aspect ratio and surface area, the rolling pressure in production is very large, ranging from millions to tens of millions of newtons. Therefore, the rolling mill equipment is complex and bulky, and the product has wide and thick dimensional accuracy and shape and surface. Quality control has also become very difficult and complicated.

Common wood products

1. Wooden furniture: Except for decorative parts and accessories in the main parts, the rest are made of wood, wood-based panels and other wooden materials.

2. Solid wood furniture: furniture made of solid wood sawn wood or solid wood board and painted on the surface; or wood veneer or veneer (wood veneer) veneer on such a base material, and then painted Furniture. Solid wood panels refer to solid wood materials formed by secondary processing such as finger joints and laminated timber.

3. Comprehensive wood furniture: The base material is made of solid wood, wood-based panels and other materials.

As the name suggests, solid wood panels are wood panels made from intact wood. These boards are durable and have natural lines, making them the best choice for decoration. However, due to the high cost of this kind of sheet, and the high construction process requirements, there is not much to use in decoration. The above is the introduction of solid wood panels in sheet metal processing by Xiao Bian.

Plate sheet purchase