Remove all wiring to the motor 1 Remove all wiring to the motor
2 Remove the low bolt of the motor and record the thickness of the gasket under the foot.
3 Remove the transmission connected to the motor.
4 Remove the coupling or pulley of the shaft extension.
5 Remove the bearing cover screws at the commutator end, the end cap screws, and remove the bearing cover.
6Open the inspection window at the commutator end, remove the brush from the brush box, and remove the connecting wire on the brush rod.
7 Remove the end cap of the commutator end and remove the brush holder.
8 Wrap the commutator with cardboard.
9 Remove the end cap screws at the end of the shaft and pull out the motor rotor with the end cap. For medium-sized motors, remove the rear bearing cap and remove the rear end cap.
10 If the bearing is faulty or must be replaced, the bearing is unloaded.
The above information is provided by the generator repair-Dongguan Nanjiang Electric Co., Ltd. (http://). It is strictly forbidden to reprint the piracy.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cnPower Distribution System
We supply various Power
Distribution System products, including Electrical Metal Junction Box, Plastic
Electrical Junction Box, Plug Adaptor, Circuit Breaker, Electrical Distribution
Board etc.
If
you want to know more about the products in Power Distribution System, please
click the product details to view parameters, models, pictures, prices and
other information about Power Distribution System, Electrical Distribution
System, Ac Distribution System,
Dc
Distribution System.
Whatever
you are a group or individual, we will do our best to provide you with accurate
and comprehensive message about Power Distribution System products.