Precautions for using the Red Star Crusher

Source: China Bearing Network Time: 2018-04-01

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The practical application of scientific and rational methods; not only can extend the life of the crusher but also improve the production power; the following clarifies the precautions for the crusher in practice:
One. Preparation before starting 1; Care should be taken to see if there is an outstanding smooth bearing; the connection in the bearing housing; and whether there is a satisfactory grease;
2; Care should be taken to see that all fastenings are completely fixed.
3; the transmission belt is good; it is found that there is a marked replacement in time; there is a belt or pulley grease; a clean rag wipes his request and;
4; The protection equipment is good; if it is found that the protection of the equipment is not safe; should be revoked immediately.
5; check whether the ore crushing chamber or other debris; such as ore; or other debris; should be revoked.
two. The beginning of the crusher; after viewing; prove that the mechanical transmission is normal; before launching;
2; This machine is only required to be launched under load conditions.
3; After launching; if abnormal conditions are found; it should stop operation; it is necessary to identify and eliminate abnormal conditions; then start from scratch; started the crusher.
three. Protection and application 1; the normal operation of the crusher; then start pouring the material.
2; breaking the data should be consistently involved in the crushing cavity; and side effects; should avoid feeding; to avoid sudden changes in load or unilaterally added.
3; Under normal conditions; the bearing temperature rise should not exceed 35 Â° C; the maximum temperature rise does not exceed 70 Â° C.
4; parking; the information of the primary feeding operation can be broken after the broken cavity should be broken;
5; In use; Ruoyin broken cavity data; blocked by parking; should close the motor; the data must be deleted first; then move from the hair.
four. Smooth 1; often pay attention to the smooth operation of the surface of the conflict; then; to ensure the normal operation of the crusher and extend life.
2; calcium-based smooth grease commonly used in machines; users can also be used to select other conditions depending on the orientation of the machine; other types of temperature and grease; but it is necessary to be protected by smooth and outstanding bearings.
3; participate in the total amount of bearing 50-70%; oil; need to replace once; 3 months. when replacing the oil; request for sanitary gasoline and fire oil; and carefully arrange the steel ball slide 4; brackets; Before the start, the pad is in contact with the grease crusher.

Recommend to friends comments close window

Bearing related knowledge

Sliding bearing rejection specification
Ntn bearing disassembly and assembly protection method electric fan bearing wear repair auto parts life test: bearing test details "SKF imported bearing cleanliness" problem

This article links to http://
Please indicate the bearing network http://

Previous:Pump E-type impeller external aerator according to the whole machine classification Next: Polyethylene. PE) Plastics clarification

Led Downlight Emergency Conversion Kit

Led Lamp Emergency Power Supply,Led Battery Ballast ,Led Battery Backup Driver,Led Driver With Battery Backup

Foshan Nai An Lighting Electric Co.,ltd , https://www.emballast.com