The reasons for the discoloration of the paint may be as follows: 1. The ester solvent in the varnish turns black with the iron container after it encounters water. 2, turpentine is easy to generate red brown pigment in the iron barrel. 3, gold and silver powder and varnish prone to acid etching, so that the paint color becomes green, dark, lose luster. 4, the storage period is too long, precipitation discoloration. 2. Add gold powder and silver powder before using varnish. Do not store it in varnish prematurely. 3, the precipitation of discoloration of the paint, if not a quality problem, can also be used after sufficient stirring. Keywords: Home decoration construction supervision Three trees paint entrance decoration paint coating home decoration HHCMS-200 Carbon Molecular Sieve
It is widely used in large air nitrogen making equipment.
Project parameters
The diameter of:1.0-1.3 1.3-1.5
The adsorption time of test condition was 58s with an average pressure of 1-2s
Adsorption pressure
Nitrogen purity (%)
Yield (Nm3/ h.t.)
Nitrogen recovery rate
0.8MPa
99.9
120
30
99.5
200
37
99
250
41
98
310
45
97
370
47
96
420
50
95
490
55
0.6MPa
99.9
95
31
99.5
160
38
99
200
43
98
245
46
97
300
49
96
335
51
95
390
56
Pay attention to Carbon Molecular Sieve HHCMS-200 Carbon Molecular Sieves CMS200,Molecular Sieve Application,Hhcms Carbon Molecular Sieve,Molecular Sieves Adsorption Zhejiang Changxing Haihua Chemical Co.,Ltd. , http://www.zjcxhhcms.com
The methods of prevention and control are as follows: 1. For shellac varnish, which is most susceptible to discoloration, and is packed in non-metallic containers.
CMS-200 is a new kind of non-polar adsorbent specially designed for extracting nitrogen-rich gas from air. It is suitable for separating nitrogen from air. It has a high adsorption capacity for oxygen and can separate nitrogen from air.
The most notable feature of the carbon molecular sieve is its high gas-producing efficiency, especially the preparation of nitrogen with a purity of less than 99.5%.
Packing density:≥660kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;
The new brush's door color is deeper than the paint itself. Is the paint discolored? The discoloration of paint mainly refers to the discoloration of varnish. The varnish was originally a clear, colorless or very light yellow color, which turned brown or black after discoloration. The color paint also has the phenomenon of discoloration, which is mainly manifested in the darker color of the paint.