When the dryer is operated under specified conditions, its efficiency will be maximized. As long as the user selects the appropriate matching dryer according to the processing volume and demand of the user, the dry air with the required quality requirements can be obtained. Conversely, site conditions -- ambient temperature, air compressor type, system configuration Expanded Metal is an extraordinarily versatile material - one with thousands of uses. It comes in three basic types, and it has four primary areas of application. Expanded Aluminum Mesh,Aluminum Expanded Metal Mesh,Decorative Expanded Metal Mesh,Carbon Steel Expaned Metal Mesh Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com
Import conditions -- pressure, temperature, flow
Export condition - dew point, pressure loss, effective gas supply
Operating conditions -- dew point control mode, supply and demand balance
Select parameters -- adsorbent type, dynamic adsorption capacity, duty cycle, safety (rich) coefficient, empty tower flow rate, contact time, regeneration gas flow ratio, heater power, time program, etc.
Adsorption dryer manufacturers generally follow the industry standard operating conditions, namely inlet pressure 7bar, inlet temperature 35 ° C, ambient temperature 25 ° C, pressure dew point -20 ° C (or -40 ° C, -60 ° C) and according to different The recirculation ratio determined by the regeneration mode is designed.
When the dryer is operated under specified conditions, its efficiency will be maximized. As long as the user selects the appropriate matching dryer according to the processing volume and demand of the user, the dry air with the required quality requirements can be obtained. Conversely, if the operating conditions are far from the specified conditions and no corresponding measures are taken, it will affect the normal operation of the equipment, reduce the working efficiency, and even fail to obtain the required quality product gas in a serious situation, and affect the service life of the equipment.
Source: http://
Http://news.chinawj.com.CN Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Basic types are raised (or standard), flattened and architectural (or decorative) meshes. The major areas of use are for enclosure, protection, support and decoration.
Expanded metal products are produced from solid sheets or plates of carbon, galvanized and stainless steel, as well as aluminum and a variety of alloys of copper, nickel, silver, titanium and other metals.
Decorative Expanded Metal: Specially designed expanded metal for use in architectural and decorative applications. These design can be used to provide privacy and to control light and air while allowing visibility. Sun screens, room dividers, and building facades are only a few of the possible design possibilities. Available in carbon steel, aluminum and other alloys in a wide range of patterns and gauges. Most of these patterns are produced on a special order basis only.
Package
1.On pallet with waterproof cloth,the biggest width is 1500mm
2.In wooden case with waterproof paper
3.In carton box
4.In roll with woven bag,the biggest width is 3000mm
5.In bulk or In bundle
Feature
1.Expanded metal premise free flow of light, heat, sound and air.
2.effective alternative cost .
3.Available in a variety of mesh configurations including diamond, square,
round, hexagonalplus architectural and decorative patterns.
4.it is easily fabricated, finished, installed and formed.