What are the precautions for bathroom waterproofing?

The waterproof work of the bathroom is an important project. If the waterproof work is not done well, it will bring great trouble to the future life, so when doing the waterproof work of the bathroom, it must be strictly executed according to the requirements, so how to waterproof the bathroom? What are the matters? Let's understand it with the editor!

How is the bathroom waterproof?

1. Before the bathroom is waterproof, first ensure that the ground is flat and free of debris. If the ground is uneven, the waterproof coating will be uneven, which will cause cracking and other problems, which will affect the quality of the waterproof coating and lose the waterproof effect.

2. The height of the waterproof coating is applied according to the actual situation of the bathroom. The general waterproof height of the ground is 30cm. This height can prevent water from penetrating into the wall. If the bathroom wall is a non-load-bearing wall, the waterproof height should be 1.8 m, so as to protect the wall.

3. In order to better integrate the waterproof layer and the wall, after applying the waterproof coating, let it dry naturally, so as to avoid the subsequent construction and will not cause damage to the waterproof.

4. After the waterproof layer is constructed, a protective film should be laid on the surface. The protective film should be completely covered with the waterproof layer, and there should be no bubbles or cracks.

5. After all the above steps are completed, a waterproof test should be carried out. During the water discharge test, the height of the water should be 2cm above the ground, and the test time should be more than 24 hours. After 24 hours, check whether there is any leakage or leakage. These problems must be redone to avoid greater trouble in the future.

What are the precautions for bathroom waterproofing?

1. If you need to replace the floor tiles in the bathroom, you must completely chisel the original floor tiles, and then use cement mortar to smooth the ground, and then carry out waterproof treatment, so that the waterproof coating will not be uneven due to the uneven thickness .

2. The seams in the bathroom are more prone to problems, so pay special attention when handling these parts, and there must be no sloppy.

3. After the waterproofing of the bathroom is completed, the sewer pipe of the bathroom should also be tested for water injection. After 24 hours, check the walls and ground around the bathroom for leaks. If there is no such situation, the waterproof quality is very good. If the above situation occurs, then maintenance is necessary.

Editor's summary: What are the relevant contents of how to waterproof the bathroom and the waterproofing precautions of the bathroom, I have introduced it here. Through the above content, everyone also knows how to waterproof the bathroom and the waterproofing precautions. I hope to help you.

What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount

How to waterproof the bathroom