Analysis of super finishing process of bearing ring

Home>Bearing knowledge>Analysis of the ultra-finishing process of bearing rings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Analysis of super finishing process of bearing ring

Source: China Bearing Network Time: 2014-01-04
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Super finishing can usually be divided into three periods: cutting period, half cutting period, and finishing period.
(1) When the surface of the grindstone and the surface of the rough raceway are touched during the cutting; because the touch area is more than that of the ノ ノ 沽 沽 沽 沽 沽 螅 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔 ㄑ沽ψ饔Resignation of Xing 鳌 饔茫 饔茫 ナ砻娴牟糠 ナ砻娴牟糠 チ チ チ チ 浜 浜 浜 浜 浜 浜 浜 浜 浜 浜 浜 チ チ チ チ チ チ チ チ チ チ チ 腿 腿 腿 腿 腿 腿 腿 腿 腿 腿The cutting and anti-cutting effect removes the peaks on the surface of the workpiece and grinds the enthalpy layer. This period is called the cutting period; during this period, most of the metal allowance is removed.
(2) During the half-cutting process, the machining continues; the surface of the workpiece is gradually smoothed. At this time; the touch area of ​​the grindstone and the workpiece is added; the pressure per unit area is reduced. Xing Wei burns. Xing Wei. Together; The pores of the stone surface are blocked; the grindstone is in a half-cut condition. This period is called the half-cutting period; during the half-cutting process, the cutting marks on the surface of the workpiece become shallower; and the darker luster appears.
(3) During the finishing period, this is the final period of super-finishing. The surface of the workpiece is gradually smoothed; the touch area of ​​the grindstone and the external appearance of the workpiece is further increased; and; the grindstone and the appearance of the workpiece are gradually blocked by the smooth oil film; The pressure on the unit area is very good. The patrol is allowed to circulate the gongs and the sputum is sputum. The sputum is called V-Xing. This period is called the finishing period. There is no cutting marks on the surface during the finishing period. Showing all the luster.
Recommend to friends comments close window

Bearing related knowledge
Oil-free bearing - the new product required for the mold occupation, the precautions when adjusting the bearing clearance, the detailed diagnosis of the bearing after the bearing equipment
NSK imported bearing inner ring fixing method


This article links to http://
Please indicate the bearing network http://

Previous: SKF: Pre-smooth sealed linear ball bearing function Next: Features of powder metallurgy oil bearing

One union Hydraulic Fittings have the hose ferrule already attached to the hose insert at the factory. This eliminates the possibility of selecting the wrong ferrule type when fabricating Hydraulic Hose assemblies.                                                       

We supply a wide range of Hydraulic One piece Fittings to suit hydraulic hoses which are used in all different types of applicationss. including BSP, JIC, NP, DIN Metric, Flanges, Standpipes, Komatsu, Toyota, etc.

One Piece Hose Fitting

One Piece Hose Fitting,Metric Hydraulic Fittings,BSP Pipe Fittings,Reusable Hydraulic Hose Fittings

SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com

August 22, 2019