Gas deflation is one of the common ways to solve the problem of non-heating radiators

Radiator is not hot? Everyone hears these words. What is the attitude at the moment? Noisy! pissed off! Irritability! .... In the winter season, people enjoy warmth in the warm spring room, and your home heating is not hot, and the happiness suddenly disappears. Radiator is not hot, what's going on here, why is the radiator not hot? The global home heating elite Rubens radiator introduction, the owner of the home does not heat the state of heating can be caused by the radiator is not deflated, as long as you pay attention to the following several kinds of radiator deflation notes, under normal circumstances can be resolved The radiator is not hot.
Radiator is not hot cause analysis:
The entire radiator is not hot, and it is generally the reason that the outdoor water inlet valve and the return valve are not opened. The single-unit radiator is not hot, because the top floor is not deflated. Radiators are semi-hot and semi-cool, and are formed by the tail gas gathering. In short, under the condition of ensuring circulating pressure and temperature, the primary cause of non-heating is air-locking. Proper deflation can be handled.
Solve the problem of non-heating of the radiator: First, it is not possible to reform the heating pipeline. Since the pipeline must have a certain degree of inclination when the pipe network device is installed, so that the air in the pipe can be collected at the top, it can be easily exhausted, and the unauthorized transformation may form an oblique The degree of mistakes, the occurrence of partial blockages, and failure to do so will not only affect oneself, but also affect other households.
Solve the problem of non-heating the radiators II: Be careful to manually discharge the cohesive gas. Because of the accumulation of gas inside the tube, it forms a stagnant water circulation, which affects heating. Therefore, in addition to installing the exhaust valve on the top floor, a manual bleed valve is installed at the rear of each radiator. Deflate when the deflation is small to prevent twisting and tighten the valve after releasing the water.
Solve the problem of non-heating radiators III: Leakage Please professional staff deal with the fittings during the heating period. If water leakage occurs, be sure not to handle it by yourself. Tell professional repair personnel in time to repair the leakage point and then repair it. Repair, which will increase the leakage point and damage the pipe fittings.
There are many reasons why radiators are not hot. Radiator deflation is one of the common ways to deal with radiators that are not hot. If the deflation can not solve the problem of radiator is not hot, you need to ask a professional maintenance personnel to come to the maintenance, must not repair.

Flanged Carbon Steel Ball Valve

Flanged Carbon Steel Ball Valve,Mild Steel Ball Valve,Carbon Steel Flanged Ball Valve,Carbon Steel Socket Weld Ball Valve

Zhejiang Chenxiang import and export trade Co., Ltd , https://www.chenxiang-valve.com