We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Suspend Linear Light,Linear Wall Sconce Lighting,Linear Wall Mounted Light Fixture,Linear Lights For Kitchen Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com
1, the installation of paint and woodworking hardware items Most wood products need to consider the issue of paint. Therefore, the installation time of the hardware needs to consider the connection with the construction of the painter. This needs to be considered from two aspects: First, the installation time of the hardware cannot be arranged too early; otherwise, the painter needs to consider the protection of the hardware too much during the construction; secondly, when installing the hardware, Be careful not to destroy the construction that the painter has already completed. Therefore, normal construction is often arranged in such a way that hardware that needs to be drilled is basically completed before the construction of the painter or before the main process is performed (such as the unlocking hole before the door lock is installed is basically at this stage The drill hole for the handle is also preferably arranged at this stage). After the painter finishes the work of {TodayHot}, the carpenter carries out the installation work again.
2. Installation of electrician lamps and switch socket panel should be done after the wall brush coating or wallpapering is completed, and then the installation of the lamps and the installation of the switch socket panel. There have been instances when a company was working to save personnel costs. In the process, the electrician was allowed to install switch sockets prematurely, and when the wall of the switch socket panel was cut with a wallpaper knife, the panel was inadvertently scratched.
3. Installation of sanitary ware and bathroom hardware As the overall management level of the current home improvement industry is still very low, the quality of workers at construction sites is generally poor. Therefore, on some construction sites, there have been a number of phenomena where the installed bathtub was used first by construction personnel. In recent years, there have been many cases of complaints in this area. Therefore, it is advisable for consumers not to install sanitary ware before starting the project acceptance and before most of the construction personnel have evacuated the site. Otherwise, it is very likely that the hair left after bathing will be found in a brand new bathtub.