Manuel Molding Silicone Rubber with Very Cheap Price (HY-5 series)

Manuel molding silicone rubber with very cheap price (HY-5 series)

  Technical Date Sheet

         570# RTV-2 Manual Model design Silicone Rubber
 
Description
570# is room temperature vulcanized silicone rubber in condensation type. It's generally named as two parts silicone rubber. Part A is a flowable liquid, part B is the curing agent or catalyst. It's mainly used for manual model design mold making .
 
Application
570# silicone rubber is used for model design of manual mold ,PVC plastic model , gypsum products mould, large size sculpture, reproduction of culture relic, electronic equipment antivibration and so on .
 
Technical Parameters  

 
Characteristics
*An eceptional fluidity and good operability, easy to demold
*Non-deformation
*Low shrinkage
*Cure at room temperature
*Temperature resistance of 150-180 Centigrade  
 
Operation instructions
Step 1: prepare the original molds
Make sure your original molds perfect. fix it on a board. And fix the original mold on a board , then used four piece of board to enclose the original molds .
 
Step 2: Take 100 G parts A and add 3G parts B and mix them evenly.
*Notes: Mold making silicon rubber is a kind of flowing liquid ,it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst .Pls follow the step strictly:
         1.Weigh the two part exactly by electronic weight..
If not , for example add two much catalyst , the operation time will be too fast to operate ,which will cause inconvinience to operate .
         2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
 
Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
        2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won't be easy to flow away and easy to brush .  
        3. We sugges to set the silicone mold for another 12 hours after demould before put into large production .
 

Package
5kg, 20kg, 25kg, 200kg
 
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25ºC
 
 

 

Manuel molding silicone rubber with very cheap price (HY-5 series)

  Technical Date Sheet

         570# RTV-2 Manual Model design Silicone Rubber
 
Description
570# is room temperature vulcanized silicone rubber in condensation type. It's generally named as two parts silicone rubber. Part A is a flowable liquid, part B is the curing agent or catalyst. It's mainly used for manual model design mold making .
 
Application
570# silicone rubber is used for model design of manual mold ,PVC plastic model , gypsum products mould, large size sculpture, reproduction of culture relic, electronic equipment antivibration and so on .
 
Technical Parameters  

 
Characteristics
*An eceptional fluidity and good operability, easy to demold
*Non-deformation
*Low shrinkage
*Cure at room temperature
*Temperature resistance of 150-180 Centigrade  
 
Operation instructions
Step 1: prepare the original molds
Make sure your original molds perfect. fix it on a board. And fix the original mold on a board , then used four piece of board to enclose the original molds .
 
Step 2: Take 100 G parts A and add 3G parts B and mix them evenly.
*Notes: Mold making silicon rubber is a kind of flowing liquid ,it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst .Pls follow the step strictly:
         1.Weigh the two part exactly by electronic weight..
If not , for example add two much catalyst , the operation time will be too fast to operate ,which will cause inconvinience to operate .
         2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
 
Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way , which will be very easy to operate and demould. Pourable silicone require light viscosity which will be easy to flow smoothly and easy to de-air .
        2.For delicate pattern products we suggest use brushing operation way , which can copy the pattern exactly . Brushable silicone require high viscosity which won't be easy to flow away and easy to brush .  
        3. We sugges to set the silicone mold for another 12 hours after demould before put into large production .
 

Package
5kg, 20kg, 25kg, 200kg
 
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25ºC