Pentaerythritol is mainly used in the coatings industry, can be used to manufacture alkyd resin coating, can make the coating film hardness, luster and durability.It also USES up with anger paint, lacquer and printing ink of pine resin needed raw materials, coating and drying oil, smoldering sex and aviation lubricating oil and so on.
Pentaerythritol Pentaerythritol,Pentaerythritol 115-77-5,Pentaerythritol Msds,98% Pentaerythritol Shandong Tiancheng Chemical Co., Ltd. , https://www.akdchemical.nl
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>NSK cylindrical hole bearing device approach NSK cylindrical hole bearing device approach
Pressing with a press <br> Small bearings are widely used by presses. Press the block against the inner ring; slowly press the end of the inner ring against the shoulder with a press. Hold the outer ring The inner ring of the block device; it will form an indentation or crush on the raceway; so it must be stopped. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
In addition; when operating; should be oiled on the cooperation surface in advance. In case of hitting the device with a hoe, it is necessary to put a block on the inner ring. This practice repeatedly forms bearing damage; therefore; only limited to small interference The condition; can not be used for large interference or medium and large bearings.
Non-displacement bearings such as deep groove ball bearings; inner and outer rings are required for interference devices; as shown in Figure 2; with screw or oil pressure; use the spacer to press the inner and outer rings together. Self-aligning ball bearings The outer ring is easy to skew; even if it is not an interference cooperation; it is also the best pad device.
Separate bearings such as cylindrical roller bearings and tapered roller bearings; the inner and outer rings can be respectively mounted on the shaft and the bearing seat. When the inner ring and the outer ring are respectively assembled, the key points are firmly closed; The two are in violation of each other; barely press in will form a roll to the surface.
Hot-packing method <br> Large-sized bearing; requires a lot of force when pressing; so it is difficult to work. Therefore; widely used hot-packing method: heating the bearing in oil; making it swell; then loading it on the shaft. This method; the device will not present a situation of improper force; can shorten the working time.
The heating temperature of the bearing; the bearing scale, the required interference; refer to Figure 3. Resolution. Precautions for hot loading operations;
(a) Bearing heating does not exceed 120 ã‚šC.
(b) In order to prevent the bearing from touching the bottom of the oil sump; the bearing should be placed on a metal grid; or hoisted.
(c) In order to avoid operation; it is difficult to install due to the lower inner ring temperature; the bearing should be heated 20 ° C higher than the required temperature by 30 ° C.
(d) After the device; the bearing is cooled; the width direction is also shortened; so use a shaft nut or other suitable method; lock it; to prevent a gap between the inner ring and the bearing shoulder.
Recommend to friends comments close window Bearing related knowledge Proper installation of rubber roller bearing method Detailed analysis of dry cutting hardened bearing steel wear mechanism analysis skills: motor bearing grease functional requirements tumbling bearing ball mill hollow shaft, bearing, bearing housing equipment smooth new skills bearing nylon cage strengths
This article links to http://
Please indicate the bearing network http://
Previous:The relationship between bearing cooperation and load type Next:The detailed judgment of TIMKEN imported bearing damage
Also used in medicine, pesticide and so on production.Pentaerythritol molecules containing four hydroxymethyl equivalent, with high symmetry, so the production raw material is often used as multifunctional compound
By its nitrification can produce pentaerythritol tetranitrate (taian, PETN), is a kind of high explosives;Esterification available pentaerythritol three acrylate (PETA), used as a coating.
Source: China Bearing Network Time: 2018-05-04