Model NO.: FBSP05
Certification: ISO9001
Substrate: Iron, Glass, Plastic, Wood, etc
Components: Solvent
Formation Mechanism: Drying in The Air
Size: 400ml
Trademark: FIRM BOND
Transport Package: 400ml/PC, 12PCS/CTN
Specification: SGS. GMP, ISO
Origin: Chansha, China
HS Code: 32082010
Model NO.: FBSP05
Certification: ISO9001
Substrate: Iron, Glass, Plastic, Wood, etc
Components: Solvent
Formation Mechanism: Drying in The Air
Size: 400ml
Trademark: FIRM BOND
Transport Package: 400ml/PC, 12PCS/CTN
Specification: SGS. GMP, ISO
Origin: Chansha, China
HS Code: 32082010
AUTO SPRAY PAINT
Product DescriptionThe product is produced through advanced technique and production process. It's a kind of fast drying thermoplastic acrylic aerosol paint, which is benzene-free, environment friendly. It has features such as simple construction, flexible operation, good atomizer, fast drying, plenty and attractive paint membrane, enduring color. And it has high integrated performance in weather ability, stickness, luster, hardness, flexibility, impact resistance and etc. These properties make it has excellent protect and decoration function. It is widely applied in decoration and repair for various substrate including metal, wood with treated surface, glass, ABS plastic and etc.
Usage InstructionCompletely clean greasy dirty, water spots and dust from spray surface before application;
Fill and level up the sunk parts on substrate by putty;
Shake can about 2 min. until liquid inside mixing completely;
Make a trial spray on small area to make sure the color is correct;
Evenly spray at 15-30cm away from surface to be painted in steady sweeping motion;
For better application, suggest to apply several thin coats rather than one heavy coat;
If there is a little left in can, rotate the nozzle 180°, then try again;
For leftovers store, keep the can upside down, press nozzle 2-3seconds to wash nozzle so as to avoid blocking.
NOTICEIf unsure with material, test firstly in a small area, check back after 10min., if no negative reaction, then continue to use.
For a proper application, should hold can in at least 45° angle.
Inflammables and pressure container. Keep away from open flames and any source of ignition. Do not puncture or incinerate cans! Do not leave cans in car under sunlight in summer! Store cans at 0-40ºC shady dry place. Keep away from sunlight, heat source and open fire. DO NOT try to refill empty cans.
Use at well ventilated place, better effectives under shady dry, dust-free place.
Do not use in rainy or cold weather.
The net weight and gross weight will change as time goes by, it's normal as it is aerosol product, and wastage rate is less than 2% every year.
If the application exceeds the required executive standard, please contact the producer.
Keep out of the reach of children.
Emergency Handling
In case of contact with eyes, flush immediately with plenty of water and seek medical advice.
In case of ingestion, induce vomiting immediately and seek medical advice.
If contact with skin, wash immediately with plenty of water and soap.
In case of inhalation, remove immediately to fresh air. If not better, seek medical advice.
Handling of Empty CansBefore discarding, please spray the residue gas and content into waste carton, make sure the can is completely emptied.
If necessary condition, open the can and clean it.
| specification |
400mlx12pcs/ctn, n.w: 100-200g/pc |
| carton size |
273x205x210mm |
| quantity for 20FCL |
2460ctns |
| Â |
 |
Changsha Firm Bond New Material Co., Ltd, belonging to core members of Shandong Meiduo Group, is a professional manufacturer and supplier of aerosol products, various
adhesive and
 sealant products, mainly including
Spray Polyurethane Foam(PU foam),
Silicone Sealant,
 Nail-free Adhesive, PVC glue,
 Contact Glue,
 Wood Glue,
 etc, which widely used in the fields of building & decoration, hardware & tools, auto spare parts and daily life, etc.
We start exporting business from 2013, however our factory  with more than 20 years production history , including 10 automatic production lines, iron can workshop, iron can printing and producing workshop to save cost and guarantee quality & delivery time. Now we have 2 production bases for our
featured products
PU foam and
 silicone sealant, one in Linyi city, Shandong province, one in Foshan city, Guangdong province.
Â
To meet different needs in the world market, we provide OEM/private label and ODM service according to customer's special requests and samples. We also provide  customer's  one-stop sourcing solution needs for various adhesive and sealant products.
With strict quality control, powerful technology support, thoughtful after-sale service, our valuable products with stable quality and competitive price are widely accepted in the market. Never ceased to be empowered by innovation, best solutions on the sealing, bonding, coating, caulking and insulating.
Contact Information
AUTO SPRAY PAINT
Product DescriptionThe product is produced through advanced technique and production process. It's a kind of fast drying thermoplastic acrylic aerosol paint, which is benzene-free, environment friendly. It has features such as simple construction, flexible operation, good atomizer, fast drying, plenty and attractive paint membrane, enduring color. And it has high integrated performance in weather ability, stickness, luster, hardness, flexibility, impact resistance and etc. These properties make it has excellent protect and decoration function. It is widely applied in decoration and repair for various substrate including metal, wood with treated surface, glass, ABS plastic and etc.
Usage InstructionCompletely clean greasy dirty, water spots and dust from spray surface before application;
Fill and level up the sunk parts on substrate by putty;
Shake can about 2 min. until liquid inside mixing completely;
Make a trial spray on small area to make sure the color is correct;
Evenly spray at 15-30cm away from surface to be painted in steady sweeping motion;
For better application, suggest to apply several thin coats rather than one heavy coat;
If there is a little left in can, rotate the nozzle 180°, then try again;
For leftovers store, keep the can upside down, press nozzle 2-3seconds to wash nozzle so as to avoid blocking.
NOTICEIf unsure with material, test firstly in a small area, check back after 10min., if no negative reaction, then continue to use.
For a proper application, should hold can in at least 45° angle.
Inflammables and pressure container. Keep away from open flames and any source of ignition. Do not puncture or incinerate cans! Do not leave cans in car under sunlight in summer! Store cans at 0-40ºC shady dry place. Keep away from sunlight, heat source and open fire. DO NOT try to refill empty cans.
Use at well ventilated place, better effectives under shady dry, dust-free place.
Do not use in rainy or cold weather.
The net weight and gross weight will change as time goes by, it's normal as it is aerosol product, and wastage rate is less than 2% every year.
If the application exceeds the required executive standard, please contact the producer.
Keep out of the reach of children.
Emergency Handling
In case of contact with eyes, flush immediately with plenty of water and seek medical advice.
In case of ingestion, induce vomiting immediately and seek medical advice.
If contact with skin, wash immediately with plenty of water and soap.
In case of inhalation, remove immediately to fresh air. If not better, seek medical advice.
Handling of Empty CansBefore discarding, please spray the residue gas and content into waste carton, make sure the can is completely emptied.
If necessary condition, open the can and clean it.
| specification |
400mlx12pcs/ctn, n.w: 100-200g/pc |
| carton size |
273x205x210mm |
| quantity for 20FCL |
2460ctns |
| Â |
 |
Changsha Firm Bond New Material Co., Ltd, belonging to core members of Shandong Meiduo Group, is a professional manufacturer and supplier of aerosol products, various
adhesive and
 sealant products, mainly including
Spray Polyurethane Foam(PU foam),
Silicone Sealant,
 Nail-free Adhesive, PVC glue,
 Contact Glue,
 Wood Glue,
 etc, which widely used in the fields of building & decoration, hardware & tools, auto spare parts and daily life, etc.
We start exporting business from 2013, however our factory  with more than 20 years production history , including 10 automatic production lines, iron can workshop, iron can printing and producing workshop to save cost and guarantee quality & delivery time. Now we have 2 production bases for our
featured products
PU foam and
 silicone sealant, one in Linyi city, Shandong province, one in Foshan city, Guangdong province.
Â
To meet different needs in the world market, we provide OEM/private label and ODM service according to customer's special requests and samples. We also provide  customer's  one-stop sourcing solution needs for various adhesive and sealant products.
With strict quality control, powerful technology support, thoughtful after-sale service, our valuable products with stable quality and competitive price are widely accepted in the market. Never ceased to be empowered by innovation, best solutions on the sealing, bonding, coating, caulking and insulating.
Contact Information