soap rack,soap holder,soap stand,stainless steel soap holder,steel wire soap stand,etc.Let your bathroom become more simple and upscale!Applicable to families, hotels, home stay and other places to use.
304 stainless steel never rust, will easy to clear, it's also very durable!
we are 15 year factory, we had big engineer team, and strong production line, can give you good serve and quanlity. Welcome to cooperation!
Soap Rack,Soap Holder,Soap Stand,Stainless Steel Soap Holder,Stainless Steel Wire Soap Stand Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com
Screw pump removal steps: 1, the screw pump and the motor from the emptying medium (to prevent the motor, toxic medium wounding); 2, remove the screw pump discharge body (1); 3, remove the screw pump stator (4) Remove the rotor (5) and the intermediate shaft (7); 5, Remove the drive shaft (44) and the shaft seal; 6 Remove the screw pump bearings (39) (41), positioning sleeve 40), should be taken out from the bearing housing; 7, long-term without the screw pump, to be anti-rust treatment, the method is to use non-painted metal surface rust smear, including the shaft surface, packing housing cavity, and lubrication. Screw pump assembly, Precautions: 1, the screw pump parts should be carefully cleaned assembly, inspection, damaged parts should be replaced; 2, the correct installation of the shaft so that the shaft rotation flexibility, no jamming phenomenon. 3, the shaft seal installation: stuffing box (18) should be installed, the packing gland (16) should be placed in the shell installation window, so that the adjusting bolt can be adjusted easily; 4. The mechanical seal should be installed with care; Clean and coated with grease; 5, the drive shaft twenty thousand to the joint assembly, the seal should be checked for damage, fill the cavity grease; 6, when installing the stator, the rotor smear the rotor, the stator cavity surface , Is conducive to the stator installation; 7, the body pressed tight, the nut tightening should be uniform; 8, installation and assembly, the coupling installation deviation: △ Y ≤ 0.2mm, △ α ≤ 30 '.