Decorative veneer decoration is commonly used in the decoration of family room decoration. 1. Recognize the difference between artificial veneer veneer and natural wood veneer veneer: the former texture is basically straight texture, the decorative panel texture pattern has rules; while the latter is natural wood pattern, the texture pattern has natural variability, no rules . 2, good decoration: the appearance of the decorative board should have a good aesthetic, the material is fine and uniform, the color is clear, the wood grain is beautiful. The texture of the matching board and the parquet should be arranged according to a certain regularity, the wood color is similar, and the seam is almost parallel to the edge of the board. 3, the surface should be no obvious defects: the surface of the selected decorative board should be smooth, no burrs, hook marks and planing knife marks; there should be no penetration phenomenon (such as local blackening, yellowing phenomenon); should try to select the surface without cracks, cracks, No skin, resin capsule and gum road; the natural warpage of the whole board should be as small as possible to avoid the sand penetration phenomenon caused by the improper operation of the sanding process. 4, the rubber layer structure is stable, no open glue phenomenon: should pay attention to the surface between the veneer and the substrate, the inner layer of the substrate can not appear bulging, stratification phenomenon. 5. Glue test for gluing strength: This method is the most intuitive method for testing gluing strength. Use a sharp flat blade to split along the glue layer. If the rubber layer is cracked and the wood is broken, the glue strength is poor. 6, to choose a low formaldehyde release plate: choose to avoid the scent of decorative panels. Because the greater the odor, the higher the amount of formaldehyde released, the more serious the pollution, the greater the harm. 7. Choose products with clear production enterprises: Most products with clear factory names, sites, and trademarks are relatively reliable.
Our automatic door kits include 1 motor+gear reducer, 1 belt,7 meter, 1 idle pulley, Microprocessor, 4 sets of carriage blue wheels, 2 sets of floor guides,2pcs remote control, 2 sets belt clamp mounting brackets, 1 power supply harness and cable connectors, 2 locator, Aluminum track whose length is 2.08 meter, 3 meter, or 4 meter.
We are a manufacturer of automatic door openers that are designed to provide people convenience. Automatic Door Systems` drive to provide that level of service is but one of the reasons why automatic doors are becoming more and more popular. Our Automatic Sliding Door systems are modern, space-saving and elegant.
Automatic sliding doors have many basic functions some of which include: automatic mode with full opening width and/or reduced opening width, and exit only for traffic control. The opening of automatic doors can also be adjustable to make the opening width smaller or larger. Important safety functions such as safety sensors prevent the door from shutting if persons or objects are in the detection zone. If the door leaves are inhibited when closing, they are immediately re-opened or if the door leaves are hindered when opening, they are immediately stopped by a safety automatic reversing mechanism.
Our most popular sliding automatic door. Think of this as the go-to door for everyday automation needs. All components fully tested and pre-assembled at factory for fast, trouble-free installation.
Applications: Retail, healthcare, airports, hospitality, clean rooms. Shenzhen Hongfa Automatic Door Co.,Ltd rated door is designed, test and certified to meet your environment needs. automatic slide doors for industrial, commercial, healthcare, and retail use. You will find our automatic sliding doors throughout in a wide variety of locations, including: Hospitals, Airports, Retail centers, Pharmacies, Hotels, Grocery stores, Hardware stores, Sporting goods stores, and more.
Automatic Sliding Doors can either be a single door sliding in one direction or bi-parting doors where each door leaf slides in the opposite direction. They are often used in grocery stores, entrances to shopping malls, hospitals and other applications where you want to provide your customers a hands free, safe and easy access to your building.In addition, one of the biggest benefits of automatic doors is energy savings. Since these doors only open when someone comes in or out of your building, it prevents the loss of energy when a door may otherwise be left open for a long time.
The control device of sliding automatic door contains basic function and extensional function, automatic operation / hold-open/closed/half-open to meet customer needs. Electric sliding door controller has multiple interfaces for complete access control systems for keeping your life and property more safety. Such as: safety beam photocell, electric locks, sensor etc. Its drive devices adopts European technology to integrate motor with gear box, which offers strong driving and reliable operation and increased power output , it can adapt to a large door.
Providing strength, beauty, and technology all in one package, Hongfa's line of automatic sliding doors provides entrance solutions for practically any application. An exclusive feature is Hongfa's sound-dampening track reducing operational noise to a mere whisper and stops vibration resonance that can be transferred to the building structures.
Automatic Door Kits,Automatic Sliding Door Opener,Automatic Sliding Door Operator,High Performance Automatic Door Kits Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com